Evan Mills's Comments

Comment Wall (11 comments)

You need to be a member of Home Energy Pros to add comments!

Join Home Energy Pros

At 2:16am on August 29, 2012, Gjorevski Saso said…

Hi Evan ,

 Thank you for your kind welcome and yes Macedonia is on the map now.

Best Regards

Saso

At 2:18am on January 5, 2012, Wieslaw Sadownik said…

Hi Evan,

Thanks for kind wellcome , and I'm proud to be one of "long distance" fans of the site..

I hope learn intensively by reading the contents, despite here we meet a little other building tradition. materials etc. I am since 2 years in the energy matters (www.irvis.pl) , and it gets day by day more exciting for me !

So - thanks for great job, and - see you !

At 3:27pm on January 3, 2012, Murray Hogarth said…

Thanks Evan

Yay. Australia is now 'on the map' as they say!

Murray

At 8:27pm on March 17, 2011, Jim Mikel said…
Thanks Dr. Mills.  Good to finally "see" you. 
At 7:23am on March 13, 2011, Gilberto De Martino Jannuzzi said…
Will do that! best regards. Gilberto
At 10:07am on December 9, 2010, Gil Masters said…
Hi Evan,

Thanks for the personal welcome note.

Would it be appropriate for me to call attention to your new website on my "energyfolks" email list (with about 3000 members)? If so, could you write a short paragraph that I could just paste into my next blurb?

Gil
At 10:55pm on December 8, 2010, Lorna G. Fear said…
Noodling around on this site, I found a video that I contributed to. Have you checked out "Energy Rap"?
At 7:52pm on December 8, 2010, Lorna G. Fear said…
Hey, Evan, thanks! I sincerely appreciate your compliment. By the way, do you know Howdy Goudy?
At 8:18am on December 5, 2010, Eric Aune said…
Thanks for the compliment! I've always told my apprentices that if its going to work well it has to look good too!
At 6:30pm on November 7, 2010, Kathleen Greely said…
Evan--nice work here! We're launching new homes and whole house programs in PA...the Pennsylvania landscape is changing quickly for the better.

Kathy
At 2:50pm on November 6, 2010, Gilberto De Martino Jannuzzi said…
Evan, thanks for the welcome! There is a lot going on here on household energy efficiency programs. I am involved with evaluation of low-income HH programs done by Brazilian utilities. Will write some more on this later.

Best regards, and congrats for this interesting initiative! I look forward being part of the network.
yours
Gilberto

Featured Forum Discussions

Too many BTU's. Too much horsepower?

Started by Steve in General Forum. Last reply by Walter Ahlgrim 7 hours ago. 3 Replies

Stack/wind pressure and flow networks.

Started by Daniel James Grundy in Training. Last reply by Daniel James Grundy 11 hours ago. 5 Replies

BDT with vermiculite in hollow CMU walls?

Started by Brad Cook in General Forum. Last reply by John Nicholas 17 hours ago. 2 Replies

Strange IR Image

Started by Larry Nissman in General Forum. Last reply by Brad Cook Mar 9. 7 Replies

Videos

  • Add Videos
  • View All

Latest Activity

Walter Ahlgrim replied to Steve's discussion Too many BTU's. Too much horsepower?
"The 5 ton system you have is not 500 hp racecar engines they are 500 hp truck engines. The duct…"
7 hours ago
Daniel James Grundy replied to Daniel James Grundy's discussion Stack/wind pressure and flow networks.
"So I wanted to start with a basic who can help then go into more detail later. But yes find…"
11 hours ago
Daniel James Grundy replied to Daniel James Grundy's discussion Stack/wind pressure and flow networks.
"My tutor got back to me and while areas don't quite feel right a little to much assumptions…"
11 hours ago
Brennan Less replied to Daniel James Grundy's discussion Stack/wind pressure and flow networks.
"Daniel, I'm assuming you're trying to predict the airflows through the different openings…"
13 hours ago
Martin Newmark joined allen p tanner's group
Thumbnail

Energy Auditing Equipment for Sale, Trade or to Purchase

Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
15 hours ago
John Nicholas replied to Brad Cook's discussion BDT with vermiculite in hollow CMU walls?
"If the drywall is in good shape, you should have little worries about the 50pa depressurization…"
17 hours ago
tedkidd replied to Steve's discussion Too many BTU's. Too much horsepower?
"Does the house ever feel clammy? Do you have to keep the thermostat below 74 to be comfortable? Is…"
19 hours ago
Danielle Sass Byrnett liked Diane Chojnowski's blog post Don MacOdrum receives BPI's 2017 Tony Woods Award!
20 hours ago

Home Energy Pros

Welcome to Home Energy Pros – the unique digital community by and for those who work in the home energy performance arena.

Home Energy Pros was founded by the developers of Home Energy Saver Pro (supported by the U.S. Department of Energy) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network. Please honor our Guidelines

© 2017   Created by Lawrence Berkeley National Laboratory.   Powered by

Badges  |  Report an Issue  |  Terms of Service