This post on the Best Ways to Save Energy was originally seen on Mapawatt.  The goal is to provide homeowners a reference page that will help guide them to things they can do and incentives they can earn for saving energy.


What are the best ways to save energy?  It’s a topic that we’ve been wondering a lot about.  The best ways to save energy for someone in Alaska are probably going to be much different from someone living in Southern California (mainly for heating and cooling reasons).  But some tips (like changing incandescent bulbs to CFL or LED) work no matter where you live, because everybody uses light.

Before you start saving energy, you may need to get a better understand of just what energy is.  If you’re an energy noob, start with:

Energy Saving 101

Once you gain an understanding of what energy is, you are better equipped to understand your utility bill and how to get the numbers on that bill to go down!

Cheap, Quick, and Easy Energy Saving Tips
We have put together a free energy saving guide that you can download if you register for the Mapawatt Newsletter (or purchase for $2.99 from Amazon). The title of the guide is 5 Cheap, Quick and Easy Energy Saving Tips.  As the title implies, it covers low or no cost strategies users can employ that won’t take too much time or effort.  A summary of that guide can be seen below:

  • Monitor and Track Energy Consumption
  • Insulate, Seal, and Block
  • Install and Use a Programmable Thermostat
  • Turn Off, Turn Down, Turn Up and Unplug
  • Install CFLs and/or LEDs

Most of these tips are covered in our post on the Top Ten Home Energy Conservation tips under $100.  View the post for descriptions, but a list of the tips can be seen below:

  1. Put in CFLs ($1.25/bulb)
  2. Get a programmable thermostat ($30-$100)
  3. Install a ceiling fan ($50-$100)
  4. Get a whole home electricity monitor ($80)
  5. Get an appliance level electricity monitor ($20)
  6. Install the Perfect Flush by Brondell ($68)
  7. Get a bicycle pump for your car tires ($27)
  8. Use an automatic light sensor – ($15 )
  9. Rechargeable Battery Charger and Batteries – ($12.50)
  10. Find air leaks with a thermal leak detector ($23.50)

Energy Saving Projects

If you’ve already conquered the cheap, quick and easy strategies, you may need to move to the next level.  We covered a free energy saving guide that Southface Institute put together, that is a great guide for DIY projects.  Other things you can do:

  • Home Energy Audit
  • Upgrading Insulation
  • More efficient heating and cooling system

Clean Energy

If you’ve done all you can for Energy Conservation (not using energy) and Energy Efficiency (using less energy to do the same amount of work), you may be ready for the third step, Clean Energy.  Clean energy systems, like Solar PV panels or Wind Turbines, will help you produce your own clean energy, which will lower the amount of energy you need to buy from your utility. The different types of residential clean energy producing systems are (and the type of energy they produce):

  • Solar PV (electricity)
  • Solar Thermal (heat)
  • Wind Turbine (electricity)
  • Biomass (electricity and heat)
  • Micro-hydro water turbine (electricity)
  • Natural Gas Fuel Cell (electricity and heat)


If you have done all the energy saving activities you can do that don’t cost you money, you might have to consider spending some money to save some more energy.  If you are going to do that, you want to make sure to take advantage of all the incentives that are available.  In our post on finding energy incentives we mentioned the following types of incentives

  • Tax Deduction
  • Tax Credit
  • Rebate
  • Free audit
  • Grant
  • Loan
  • Discounts


If you are planning major energy improvements, you may need to finance your energy saving investment.

One option is the

where you can take out money for energy improvements when buying or refinancing a new home.

On our page on solar financing we covered a list that One Block off the Grid put together. Their categories include (with their corresponding hyperlinks):

Other Links:

Smart Ways to Save Electricity

Top Energy Saving Tips

Views: 348


You need to be a member of Home Energy Pros to add comments!

Join Home Energy Pros

Comment by Ryan Schuchler on August 31, 2012 at 8:57am

Chris, thank you for posting this informative blog. To add to the comment made by Gjorevski, energy efficient replacement windows can reduce heating and cooling bills (and, of course, conserve energy) regardless of the type of climate. They'll help to keep the heat outside of your home when the temperatures are high, but conversely will keep the heat inside your home when it's cold outside. Triple Pane windows are an even better option, since they provide maximum energy-efficiency. Thanks again for these helpful tips!

Comment by Gjorevski Saso on August 30, 2012 at 9:57am

After i changed windows last year and put insulation on one wall of my house (the one on north side), I noticed drastic energy saving - especially in winter when temperatures can be as low as -25 below zero.

Comment by Chris Kaiser on August 27, 2012 at 11:53am

Eventually I'd like to create a checklist that users can use to stay on top of what they have done and what they would like to do.

Comment by Chris Laumer-Giddens on August 27, 2012 at 6:10am

That's the key, "staying on top of it." The simple act of installing doesn't cut it. A lot homeowners don't take the time to learn, but some of them do.

I think paying attention and following through with the information/tips in posts like this is what homeowners can do to impact their energy use the most.

Comment by Chris Kaiser on August 27, 2012 at 6:01am
I always tell people to program their thermostats. And then repeat it over and over. Most people may program them once, then forget to ever adjust it. Staying on top of a home's programmable thermostat is probably the single biggest thing a homeowner can do to lower their energy consumption. Thoughts?
Comment by Chris Laumer-Giddens on August 27, 2012 at 5:00am

Well done, Chris!

What have you found to be the most effective of all these strategies. I see and hear so many different results, and there's never any one thing can be said works for every home. They're all different with their own conditions. A house may be tight, but have poor windows. And, vice versa.

So, just wondering what others are seeing as the most beneficial energy saving strategy (at least, on average)


Featured Forum Discussions

BPI Anaylist and installers

Started by Larry R Waters in BPI. Last reply by Quinn Korzeniecki yesterday. 1 Reply

What causes a temperature plane in a home

Started by Energy Wise Solutions in HVAC. Last reply by Brad Cook yesterday. 6 Replies

Velocity Pressure Testing

Started by Horace Douglas Hunt, Jr. in General Forum. Last reply by Horace Douglas Hunt, Jr. Apr 15. 2 Replies


  • Add Videos
  • View All

Latest Activity

Chris Woods added a discussion to the group Energy Auditing Equipment for Sale, Trade or to Purchase

Minneapolis Blower Door Fan and Door frame $990 OBO

I have a used Minneapolis blower door fan (fan only, no controls or panel) and the blower door…See More
16 hours ago
Profile IconManuela L Heyn and Paul Nagel joined Home Energy Pros
19 hours ago
Bill Spohn replied to Eric Sperline's discussion Wanted: Energy Auditing Equipment for sale in the group Energy Auditing Equipment for Sale, Trade or to Purchase
"If you choose to buy new, give TruTech at call at 1-888-224-3437 option 1"
21 hours ago
Home Energy Magazine's blog post was featured

The Legends of Home Performance

A project long in the making, we're happy to finally reveal some of our Legends of Home Performance…See More
23 hours ago
Quinn Korzeniecki replied to Larry R Waters's discussion BPI Anaylist
"Hi Larry, We're glad you're reaching out to hire some BPI folks! You can also submit…"
Larry R Waters posted a discussion

BPI Anaylist

Industry leader in the north bay area California. Looking for experienced professionals and future…See More
Larry R Waters joined Diane Chojnowski's group

Job Board

This group is for posting jobs related to all aspects of the home performance industry including…See More
John Nicholas replied to Jim Fowler's discussion TREAT modeling of mid-rise apartments low heating load
"So why is tenant behavior significantly different in this building?"

Home Energy Pros

Welcome to Home Energy Pros – the unique digital community by and for those who work in the home energy performance arena.

Home Energy Pros was founded by the developers of Home Energy Saver Pro (supported by the U.S. Department of Energy) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network. Please honor our Guidelines

© 2017   Created by Lawrence Berkeley National Laboratory.   Powered by

Badges  |  Report an Issue  |  Terms of Service