A. Tamasin Sterner's Blog – July 2011 Archive (1)

Codes, Ignition Barriers, Foam Products, Manufacturer's Installation Specs

In the housing retrofit and energy upgrade world, we use lots of foam products, don't we?  Did you know that some products may not be used in certain areas of houses? Codes and product manufacturers specify what can be used where, and when an ignition or thermal barrier must be used to cover the product in order to meet codes and protect occupants in the event of a fire.  Read all about our research at www.PureEnergyCoach.com and click on Quality… Continue

Added by A. Tamasin Sterner on July 7, 2011 at 8:14am — 5 Comments

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Steven Lewis replied to William Fisher's discussion Can tankless water heaters provide hot water even when the groundwater is fairly cold?
"Look at reducing the ambient humidity in the home.  The dew point is the key to the…"
13 hours ago
Olivia Taylor posted blog posts
23 hours ago
norman farwell replied to Bryan Pringle's discussion Dense packed cellulose in basement?
"Ha, we're on the same wavelength.  That's the big question--I'm still thinking…"
yesterday
Bryan Pringle replied to Bryan Pringle's discussion Dense packed cellulose in basement?
"Thanks Norm, we'll have a couple of case studies when all is said and done. Just curious, do…"
yesterday
norman farwell replied to Bryan Pringle's discussion Dense packed cellulose in basement?
"Bryan,  I am trying the same thing for most of the same reasons and also against advice to the…"
yesterday
Morgan M Audetat commented on Sean McLoughlin's blog post Programming in-floor electric radiant heat, is it worth it?
"You would need a large bathroom to see the difference. We install them both ways depending on the…"
yesterday
Dennis Heidner commented on Sean McLoughlin's blog post Programming in-floor electric radiant heat, is it worth it?
"The key is that this is the bathroom.  Occupancy is not constant.  It is more likely used…"
yesterday
Charles Cormany commented on Sean McLoughlin's blog post Programming in-floor electric radiant heat, is it worth it?
"I have seen resistance floor heaters add nearly $100 per month to an electric bill. Since most…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service