Elfi Wall System

R40 walls and R60 roofs

  • photo
  • photo
  • photo
  • photo
  • photo
  • photo


You need to be a member of Home Energy Pros to add comments!

Join Home Energy Pros

Comment by Ron Friedman on May 18, 2012 at 6:16am

Elfi also has a system for retrofitting residential buildings. It does require the removal of either the exterior or interior wall coverings. The result is R40 walls. Same can be done for the roof but you will get a higher R value.

Comment by Ron Friedman on May 17, 2012 at 7:17am

The Elfi Wall System allows you to build or retrofit existing structures to R40 walls and R60 roofs. Our shells go up in 1/3 the time of traditional construction. Load bearing walls to 9 stories. Any architectural element can be accomodated. We manufacture in Chicago however we are looking to license others in our technology, design your factory and train your staff.

Our retrofit system can go on the inside or outside of your existing structure.

Design any Elfi system with solar pv, solar thermal, energy storage and net zero energy needs are within reach.

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Bob Mariani replied to Alan Gindt's discussion Minneapolis Blower Door System for sale in the group Energy Auditing Equipment for Sale, Trade or to Purchase
"Is this still available?"
2 hours ago
Profile IconWilliam Smith and Juan Jose Palacios joined Home Energy Pros
9 hours ago
Eric Kjelshus replied to John Gillis's discussion Energy Savings of Whole House Fans vs. Air Conditioners in SoCal Featured on New 'Ask This Old House' Season in the group News & Announcements
"2000 SF house in Kansas City needs a 36" whole house fan or about 8,000 CFM takes a 1/4 HP fan…"
11 hours ago
Eric Kjelshus joined Diane Chojnowski's group

News & Announcements

Share your news and announcements with the community in this group.See More
11 hours ago
Eric Kjelshus replied to David Byrnes's discussion Insulation machine preferences
"If you find over heating look at voltage/amp draw very hard.    I find if you have…"
11 hours ago
Colin Genge posted events
13 hours ago
Adrienne DeAngelo posted an event

GreenPoint Rated CORE Training at Best Western Plus Marina Shores Hotel

October 15, 2015 to October 17, 2015
Increase your certifications or get to know the GreenPoint Rated system so that you can work more…See More
14 hours ago
Colin Genge replied to John Carton's discussion Smoke Puffer stick
"Retrotec Smoke Puffer is available for pickup from Energy Federation. They will not ship them due…"
14 hours ago

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service