Jamie Kaye's Discussions (36)

Discussions Replied To (19) Replies Latest Activity

"Good thread. The words from Ross via Elk River and Steve Walco are encouraging. The…"

Jamie Kaye replied Dec 11, 2010 to What's Wrong with the Home-Energy Audit Industry?

19 Dec 13, 2010
Reply by Dennis McCarthy

"Allen, I have seen foam that was not mixed properly become crumbly. (A) side/ iso he…"

Jamie Kaye replied Dec 6, 2010 to Spray Foam vs. Fiberglass - R-value only?

25 Mar 2, 2011
Reply by Bryce Cramer

"Something is wrong with that insulation Allen. The old PolyUrea foam did have some p…"

Jamie Kaye replied Dec 6, 2010 to Spray Foam vs. Fiberglass - R-value only?

25 Mar 2, 2011
Reply by Bryce Cramer

"I have used radiant barrier style duct wrap for insulating ductwork, aka bubble wrap…"

Jamie Kaye replied Dec 6, 2010 to How do you recommend improving knee wall insulation???

21 Feb 10, 2011
Reply by A. Tamasin Sterner

"Ed, are you saying spray dense pack against the roof sheathing? I have been under th…"

Jamie Kaye replied Dec 6, 2010 to How do you recommend improving knee wall insulation???

21 Feb 10, 2011
Reply by A. Tamasin Sterner

"Al, I have heard of the "flash and batt" approach, but there are some problems with…"

Jamie Kaye replied Dec 6, 2010 to Spray Foam vs. Fiberglass - R-value only?

25 Mar 2, 2011
Reply by Bryce Cramer

"John, every house I have done an air seal verification for was already foamed by the…"

Jamie Kaye replied Dec 2, 2010 to Spray Foam vs. Fiberglass - R-value only?

25 Mar 2, 2011
Reply by Bryce Cramer

"Evan, I have tested lots of houses with spray foamed floors and that application see…"

Jamie Kaye replied Nov 28, 2010 to Spray Foam vs. Fiberglass - R-value only?

25 Mar 2, 2011
Reply by Bryce Cramer

"good thread. I agree we need to charge people for what they need and not what we wan…"

Jamie Kaye replied Nov 27, 2010 to Combustion Appliance Testing Can Be Easy if You Understand What and Why You Are Testing

10 Dec 2, 2010
Reply by Tim Phillips

"thats a lot of lamps!!"

Jamie Kaye replied Nov 26, 2010 to Best Energy Myths

40 Dec 27, 2012
Reply by Nehemiah Stone

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
9 hours ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
9 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
12 hours ago
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
12 hours ago
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
13 hours ago
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
15 hours ago
Lars olsen posted a blog post
22 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"The heat exchanger gets burnt out, if presser is to high or if mix is to rich, then I see holes in…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service