The One Month Countdown to RaterFest! has Begun!

RaterFest! (September 5-7) is less than one month away...  
Don't forget to register!

Presenter:  Dan Wildenhaus

Topic: Lessons Learned in Low Load Homes
Read more about Dan's Session. 

Why you want to hear what Dan has to say:

Dan Wildenhaus brings passion to every aspect of his life. One big challenge for Raters is what to do with low load homes and all of the challenges that we face once we get homes to the low end of the scale. Dan’s real world experiences in constructing and assessing low load homes will be valuable to all Raters working in high performance homes.

  

Presenter: Justin Wilson

 

Topic: High R-Value Wall Systems
Read more about Justin's Session. 

Why you want to hear what Justin has to say:

Justin Wilson has years of experience working on the bleeding edge of homebuilding. He’s also a very experienced trainer and educator and brings both humor and a lack of suffering fools to his presentations. So, don’t be foolish, come and listen to Justin!

Register soon to ensure getting your first pick housing option!

    

Views: 27

Tags: CEUs, Conference, RaterFest, RaterFest!

Comment

You need to be a member of Home Energy Pros to add comments!

Join Home Energy Pros

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
11 hours ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
11 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
14 hours ago
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
15 hours ago
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
16 hours ago
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
17 hours ago
Lars olsen posted a blog post
yesterday
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"The heat exchanger gets burnt out, if presser is to high or if mix is to rich, then I see holes in…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service