Test Taking Tips: ENERGY STAR V3, RESNET, CEA, & BPI

Whew, as of yesterday (April 22nd) and taking the ENERGY STAR V3 test (long story short – the test was not available when I took the original class), that is it for the test taking (Since posting this, I had to take another 2 tests & classes for another program I am working with - will the madness ever stop?). As I was sitting there taking the test, I was amazed at how many people were flipping through pages in the book, instead of using the online versions that were available. Driving home I also was thinking back to all the other tests, advice all the different people ask on the forums, and decided that maybe I should put together a quick Test Taking Guide for all these different programs. (Yes, I based this article on someone with the knowledge & experience to actually do the work)

Answer the Question based on who is asking it:

The most important piece of advice I can offer, is to remember who is asking the question and the answer they are looking for. For example – if RESNET is asking the question, it is based on their curriculum at the time it was written. It does not matter if they changed something the night before, the week before, another program disagrees with them, or you just know it is flat out wrong – the correct answer for that test is what you have access to while taking the test. A real good example of this is the BPI test & standards for Building Analyst & Envelope Professional as the two do not exactly line up (at least when I took them) so depending on the test, you need to answer accordingly.

Use all the tools allowed:

Use the tools allowed – in many cases like the ENERGY STAR test I took, BPI, or RESNET – you have certain information available online. Instead of trying to flip through all the pages to find out what type of MERV filter is needed, if you perform a simple search on the Adobe file for the word MERV you will generally find the info you need in seconds, instead of wasting minutes searching through all your notes, checklists, etc…

Choose the best answer based on…

While this one could almost be BPI specific, select the best answer based on the group asking the question. One example I did list in the BPI articles was the one about which chemical might one find in Pressure Treated wood, where all four could be found in it. The correct answer in this case would be the one that was the most poisonous.

Practice Tests & Questions:

Seriously folks, they put them there for a reason, well generally quite a few… The first is so you relax and know what type of questions to expect, how they are worded, and how the test questions will be presented to you. As for the last point, they are all multiple choice; the only variance is if you are taking it online (RESNET & BPI), using a SAT style sheet (CEA), or circling the correct answer in a test book (ENERGY STAR). As an FYI for ENERGY STAR, it mostly is based on the Checklists, an answer or two from the Executive Summary, the use of the logo, and the pictures in the TERC guidebook (most of the other tests are described in the articles I wrote and linked to below).

The main reason they will give you for doing the sample questions is also to make sure you know the info, as in many cases you will see a similar question later. I would rank RESNET & CEA up there for the importance of completing those sample questions. While I could not find any Practice Tests online for any of the other tests, I did post this one on Energy Auditor Talk for the BPI Building Analyst test. Speaking of BPI, for the field exam – pay attention to how the instructor teaches the CAZ portion & parrot it back to them. While one would assume that the standards are clear and understandable, I have done two different ones & both instructors had their own “understandings” of the standards. If you don’t believe this – feel free to pop over to almost any site & look at the “discussions” on CAZ testing, drilling vents, etc… (Especially the BPI/RESNET board on Linked In)

Relax & Best of Luck:

If there were one piece of advice anyone can give you (I think I heard that from every instructor), it would be to relax and get a good night’s sleep before the test. If you are worried about the tests, you may wish to check out my articles on them (BPI, RESNET, ENERGY STAR, CEA), or review a few of the forums out there. What you will find is many of us saying the same thing – for the three “Residential” programs, if you have been in the trades for a while & understand the principles, you should do fine. For the CEA test, it helps if you are a genius with math, but even if you are not it is still very doable, hard but doable. Last but definitely not least – good luck on your test.

 

(Original Article posted 4.22.11)

Views: 754

Comment

You need to be a member of Home Energy Pros to add comments!

Join Home Energy Pros

Comment by Cindy Matthews on June 20, 2011 at 10:16am
Thanks for your tips and insights. :)
Comment by Mahendra Shah on June 20, 2011 at 9:08am

Hello Sean,

 

Thanks for sharing the knowledge base information accessing approach.

 

Please keep up. Hope others will join in this efort to Educate energy Professional on

applied knowledge information. [ which easily equates in successful certification ]

 

Mahendra Shah

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Jan E. Graveamker replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"Hi, I have seen these fans in mounted in hall way ceilings, I have a couple of issues with…"
7 minutes ago
Jan E. Graveamker replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
16 minutes ago
Everblue posted a status
"Check out this video that Betty Saenz put together about Everblue's BPI training! Betty is a Realtor/EcoBroker in TX. http://bit.ly/1nSxcGJ"
26 minutes ago
David Eakin replied to Jamie Kaye's discussion Flickering LED lights
"I think the comments by Maria and Dennis have some merit for my own situation. I originally used…"
29 minutes ago
Ryan Rutledge commented on Hal Skinner's group Radiant Control Coatings
"Great idea.  Our company has a radiant control coating product so I think we can definitely…"
1 hour ago
Profile IconRyan Rutledge, Tom Mallard and 2 other members joined Hal Skinner's group
Thumbnail

Radiant Control Coatings

A group where people who work with radiant barrier coatings can let others know all of their uses.See More
1 hour ago
Tauran Ivall joined Sean Lintow Sr's group
Thumbnail

Best Practices (Residential)

Best Building, Retrofitting, or even Auditing Practices - what are they, what should change, what…See More
1 hour ago
Kurt Shafer replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"Graham, Here are some facts Whole house fans preceded air conditioning by decades - example  -…"
2 hours ago
Brice Fawley commented on Brandon Walton's event Efficiency First AZ is Hosting Huge Meeting August 20th!
"This is a must attend. The future of the Home Performance industry in Arizona is a hot topic and we…"
2 hours ago
Graham Irwin replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"Kurt, The "large fan" is a whole house fan moving anything from 1000-4000 CFM. By…"
3 hours ago
Kurt Shafer replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"Graham, what "large fan" are you referring to?  I am fascinated by your comment…"
11 hours ago
Graham Irwin replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"I think it is important to check the energy consumption of such a large fan, even assuming it can…"
13 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service