Saving Your Heating Dollars with An Insulation Upgrade

I know everyone works very hard for their money (in order to pay the bills), but what you don't realize is how much of your hard earned energy dollars are actually slipping right through the cracks of your home. Keeping your home at a comfort level (by conditioning it) can be very costly. I know everyone would like to reduce their energy bills in our freezing winter months and then again, in the summer cooling months? Well, a good place to start would be a professional infrared home-energy efficiency inspection. My infrared inspection
will actually show you where you are wasting your hard earned energy dollars, and at the same time, I will demonstrate how you can properly seal those areas that are pulling your energy dollars to the outside of your house.


There are many building envelope anomalies that can generate significant heat and air conditioning loss, which causes your energy dollars to be wasted in a not-so-tight home.

moving arrow

Sources of Air Leakage in a Typical Home

air leaks

air house leaks

My infrared camera allows me to perform a comprehensive energy efficiency inspection within your home by locating and pin-pointing those areas where unconditioned air is infiltrating into your living areas. Most air infiltrations are located at wall penetrations (such as windows, doors, vents, etc), and at transition areas of fully insulated walls, ceilings and floors. My thermal scan will identify the smallest of insulation breaches and fissures within the concealed cavities of your walls and ceilings. I will literally show you where you are wasting your precious energy resources and your hard earned dollars. My IR camera enables me to point out exactly where your costly energy dollars are being lost. I will then assist you in determining how to properly insulate those breached areas with minimum damage to your surfaces, so you can get the most out of your heating and cooling systems for many years to come.


infrared line

No access to the top side of this ceiling, but infrared detects missing insulation

insulation missing

infrared line

An infrared inspection detects a radiator conducting heat to the exterior.

thermally detecting radiator

infrared line

During a Re-hab, infrared imaging detects missing insulation above ceiling

insulation void


An infrared home energy efficiency inspection can be used to verify problems caused by poor design, poor workmanship, or material failure. With the ridiculously high priced heating fuel today, my energy audit can pay for itself in as little as one year. This is the ideal inspection to conduct for numerous
situations in a typical home…


1) Use my infrared services while I’m performing your Standard home inspection. This valuable option is not included in my standard home inspection fee.


2) You can hire me immediately after completion of your newly constructed home while the home or building is still under warranty with the building contractor. I can also scan your new home on construction stage inspections. (In many cases, those moisture stains on your basement walls are explained away by
the builder as "during construction" moisture. It pays to confirm this before the builder’s warranty expires.)


3) If you own an older home that is costing you too much in energy dollars due to excessive air drafts, I can pinpoint those problem areas where cold air is infiltrating your living space. Then, it’s best if you contact a building contractor to upgrade those specific areas that I will be clearly identifying throughout your home. All efficiency information and pictures will be transferred onto a professional thermal report for your convenience.


4) An infrared energy inspection will easily locate any missing insulation behind your finished walls and ceilings. Then, you can contact an insulation contractor to upgrade the areas that I will be identifying throughout your home. These areas will also be clearly identified on a professional energy efficiency report. During this inspection, I can show you how you can insulate specific areas without removing walls or ceilings.


5) I am able to detect potential mold problems behind walls and ceilings. All moisture issues must be mitigated immediately. As I stated previously, infrared imaging does not detect the actual Molds behind your walls and ceilings, but it will detect the issues associated with Mold build-up.


6) Infrared Thermography provides you with a unique opportunity to assess the energy efficiency of your HVAC (heating, ventilating, and air conditioning) systems, including the tightness of the duct work that is located behind your walls and ceilings. In order to prevent deadly carbon monoxide poisoning, this inspection will also test for leaks throughout the vent pipes.


Windows look great visually, but infrared detects three thermal barrier leaks

thermal window defect

As you can see, having an infrared energy efficiency inspection makes it much easier to positively pinpoint problems throughout your home, instead of simply making an educated guess without the camera. An IR inspection also allows me to communicate my findings with greater understanding to you (the homeowner)
instead of just “speaking another language.” As one client had put it very clearly, "This inspection lets my eyes make sense of what my ears are hearing".

Now that makes perfect sense, Right?


The dark blue areas indicates that insulation is missing in this area

infrared detects missing insulation


Thermal imaging pictures combined with digital photographs can greatly enhance your understanding of just what the problem is and how to go about having it repaired with minimum damage to the home. My final energy
efficiency report
will enhance your ability to deal directly with the contractors that may be performing the repair work for you. All you have to do is show your contractor the infrared energy efficiency report and they will
fully understand your issues. After your contractor completes their upgrade, and before you make any final payment, you can then contact me to perform a final scan to verify that all work was performed correctly.


Looks great visually, until I detect insulation defects with thermal imaging

infrared detects voids in insulation

Views: 81

Tags: (Infrared), Imaging, In, Massachusetts, Thermal

Comment

You need to be a member of Home Energy Pros to add comments!

Join Home Energy Pros

Photos

Loading…
  • Add Photos
  • View All

Latest Activity

Jonny Fisher posted a discussion

Used energy equipment for sale (blower door, duct blaster

I've got some used equipment that I need to sell. Let me know if you are interested in any of the…See More
7 hours ago
Joe Quiroz Jr. liked Don Hynek's discussion Superinsulation retrofit is Complete!
11 hours ago
Mick Lane replied to Rob Buchanan's discussion High-use headscratcher
"The geothermal heat pump is the most likely culprit.  The heat pump doesn't make heat it…"
11 hours ago
Mick Lane is now a member of Home Energy Pros
18 hours ago
Empower Efficiency added 2 discussions to the group Job Board
19 hours ago
Tom White's video was featured

A net-zero builders formula for insulating a super energy efficient home

Here is Peter Amerongen's formula for insulating a super energy efficient home.
yesterday
Dale@EnergyWright replied to Don Hynek's discussion Superinsulation retrofit is Complete!
"Very nice! I'd like to do the same with my 1885 home. Can you tell us more about foundation…"
yesterday
Colin Genge updated an event
Thumbnail

Measuring HVAC Performance webinar at Online

February 23, 2016 from 11am to 12pm
Learning Objectives:How to measure HVAC total flow.Use your gauge for static pressure and remote…See More
yesterday

© 2016   Created by Lawrence Berkeley National Laboratory.   Powered by

Badges  |  Report an Issue  |  Terms of Service