Anyone attending the RESNET conference in Orlando next week and who are currently providing IR inspections as either a BPI or HERS Rater inspector, might want to sit in on the presentation of the new IR Standard Interium Guidlines currently being approved. Rogge Miller from GWSSI, John Snell from Snell Group and myself will be going over the IR portion of the Chapter 8 Performance Testing and are hoping for some solid discussions and feedback from those interested in how this is going to effect the industry....AND IT IS GOING TO!

The session title and time is:

RESNET New IR Testing Guidelines: An Overview of the New Infrared Standard- Wednesday March 2nd 8:30-10 AM, Grand Ballroom- Salon VII

 

We have been working on this for quite some time now (yes, years!) and although we are closing in on it's completion and adoptation, we know there are going to be changes made, requirements discussed and reports examined! We need to have dialog so if you have not been a particapant to date, it's never too late to join the party!

 

See you there!

Bret Monroe

Monroe Infrared Technology Inc.

http://www.monroeinfrared.com

 

Views: 19

Comment

You need to be a member of Home Energy Pros to add comments!

Join Home Energy Pros

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
1 hour ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
1 hour ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
3 hours ago
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
4 hours ago
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
5 hours ago
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
6 hours ago
Lars olsen posted a blog post
14 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"The heat exchanger gets burnt out, if presser is to high or if mix is to rich, then I see holes in…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service