If you want to learn more about using infrared thermography for home inspections, tune into the upcoming webinar that I’ll be presenting for the Wisconsin Energy Center on Tuesday, November 9th from 1:00-2:30 CST. See http://www.ecw.org/ir for details. I’ve packed a lot into this webinar and it is strictly non-commercial.

Please note that a Fluke TiR imaging system (a great unit to use for building inspections!) will be given away by the webinar sponsor, Fluke, to a very lucky participant! You can also have as many people as you want listening in for one registration fee so plan to have the whole crew on hand if you can.

Thinking Thermally!
John

Views: 23

Comment

You need to be a member of Home Energy Pros to add comments!

Join Home Energy Pros

Comment by Fluke Thermal Imaging on November 3, 2010 at 4:35pm
Agreed! Thanks for making that correction, Michael.
Comment by Michael Stuart on November 3, 2010 at 4:15pm


Comment by Michael Stuart on November 3, 2010 at 4:13pm
John... a quick correction on your post. Fluke has provided a TiR1 Thermal Imager... even better than a TiR!

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Bijou Lulla posted a blog post

ENERGY EFFICIENCY RETROFITS.....IN NUMBERS WE TRUST

There has been much ado about the recent paper published by E2e; Do Energy Efficiency Investments…See More
9 hours ago
Mariusz Chorazy posted a blog post

Here are a few tips to keep your air conditioning bill low

TAKE GOOD CARE OF YOUR AIR CONDITIONER – Like any major appliance, your AC requires regular…See More
yesterday
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Morgan, I got this below from the Knight installation manual. I note a few things, -These…"
yesterday
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
Saturday
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
Saturday
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
Saturday
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
Saturday
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
Friday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service