Here are links to my latest posts on how these motors can be used for retrofitting in existing HVAC systems.

HVAC Savings Upgrades – Cutting Fan Watts In Half or More 

In this post I cover how the savings can be dramatic, and the most important part is to get duct pressures low.

Install a Direct Current Indoor Fan Motor

In this post I cover a couple of the different motors on the market - pitfalls and plus marks for each from an experienced viewpoint.

Views: 240

Tags: AC, Efficient, HVAC, Motors

Comment

You need to be a member of Home Energy Pros to add comments!

Join Home Energy Pros

Comment by Allan Mullaly on December 31, 2012 at 3:08am

Great to read!!

Comment by Steph S on April 30, 2012 at 1:30pm

What motor would you suggest to be the most beneficial for someone installing an HVAC in Michigan?

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Jerry Lawrence posted events
15 hours ago
Morgan M Audetat replied to Bryan Pringle's discussion Dense packed cellulose in basement?
"Right you are. You have to ask: what will the cellulose contribute.  Here in Minneapolis we…"
16 hours ago
Morgan M Audetat replied to Tony Hicks's discussion Slab-on-grade Insulation
"All slabs float. We have been installing radiant floors on various slab constructions since the…"
16 hours ago
Tony Hicks replied to Tony Hicks's discussion Slab-on-grade Insulation
"2" XPS foam. I'd love an R-20. Having foam thick enough to get an R-20 would be…"
17 hours ago
Morgan M Audetat replied to Larry Schaffert's discussion How to correctly insulate exterior wall in a 1900 house?
"Sorry, I did missed the "siding nailed directly to the framing", my grandfather would…"
18 hours ago
Morgan M Audetat replied to Larry Schaffert's discussion How to correctly insulate exterior wall in a 1900 house?
"My own farm house is sided with 1/2" t&g pine boards and vinyl. We foamed then from the…"
18 hours ago
Tony Hicks replied to Tony Hicks's discussion Slab-on-grade Insulation
"Great thought! I think that would work. I'll have to put the cost together and see where I…"
18 hours ago
Danny Gough replied to Tony Hicks's discussion Slab-on-grade Insulation
"This is a tough detail because the foam on the edge of a slab doesn't provide sufficient…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service