Housing Bale-Out - Boulder Architect Streamlines Green Building

 

Straw-bale houses have come a long way since Midwestern homesteaders used to stack sod on the Great Plains and call it home.  More recently, 20th century straw-bale builders were either crunchy, granola types hand-crafting their own über-green homes, or affluent greenies seeking to create off-grid trophy houses, budgets be damned.  In all cases, though, straw-bale has been the preserve of the one-off – designed and built one at a time.  Until now.

 

One Boulder architect is adapting a European production model that has allowed him to increase his straw-bale business exponentially and factory-produce homes less expensively than other high-efficiency, architect-designed housing.  Brian Fuentes stacks framing and bales on conventional slab foundations, runs wiring and plumbing throughout and covers the bales with imported hydraulic French plaster that hardens like concrete.  The result – a pre-fab panelized system – is artisanal, high-end yet it still has the warmth of the human hand.

 

The key to Fuentes’ economies of scale is in the framing process, and where that happens – in a production facility versus on site.

 

THE PROCESS

 

Fuentes, a 34-year-old architect in Boulder, models the houses in his studio, builds the load-bearing framing there, stuffs the framing cavities with straw bales and applies two coats of plaster.  When dry, Fuentes transports the panels to the job site, and PRESTO!  -- Installers erect the completed walls sealed full of straw.  Fuentes compares them to LEGOS, and he says he aims to “take the drama out of straw-bale building” with his process.

 

Straw-bale houses conjure images of the “three little pigs” – straw houses collapsing under the big, bad wolf’s heavy breathing.  Yet the fable belies reality.

 

The houses are twice as insulated as code-built homes (R-40 wall systems versus R-21), and they withstand fire better than stick-frame construction.  In fact, a Fuentes home withstood one of Boulder’s notorious canyon fires this summer.   Fuentes attributes the house’s surviving because of its metal roof and lime plastering.

 

The holy grail for high-efficiency building is carbon neutrality, and that’s where straw-bale outpaces almost everything.  Most of the building materials he sources are local – straw from Alamosa, Colo., clay from Golden and lumber reclaimed from Boulder.  And “net-zero” housing (where energy use in equals energy generated and saved) is easily within reach with straw-bale building. 

 

THE GREEN, GREEN GRASS OF BOULDER

 

Fuentes is a visionary who speaks rapid-fire about his vision for the building industry, peppered with high-efficiency building stats.  He grows misty when he talks about the “orders of magnitude” that straw-bale homes can save in energy – 10 times less needed for heating and cooling compared to conventional homes, and 75 percent less total energy, with lighting and appliances.

 

Boulder is the perfect place for Fuentes, who studied architecture at the University of Oregon, another hotbed for green building.  Building straw-bale there was fun, he says.  “You had big, thick walls inside, and it feels cozy.  It works well in earthquake zones because they’re kind of spongey.  The bales bounce around.” 

 

Boulder building codes require all newly built homes to be 25 percent more energy-efficient than conventional homes so straw-bale is one option for homeowners.  Before he began pre-fabbing straw panels, he said he worked on four homes a year.  Because of his factory system, he’s already been involved with 13 projects this year, including his own home, which he’s building from the ground up. 

 

NON-COMPETE

 

While Fuentes may be simplifying what’s essentially an artisanal process, he’s hardly in danger of upending the home-building industry.  Though young in his career, Fuentes has been involved with only 25 of the homes.  Last year, national single-family housing starts numbered 470,900, and that’s 80 percent off the building peak of 1.7 million in 2005, says the National Association of Home Builders.  Even in Boulder, Fuentes plays for a small team, and he estimates he’s one of only five straw-bale builders there, one of 25 in Colorado and only one in maybe 100 nationally. 

 

His homes can’t compete with conventional stick-built homes, selling for $80 to $90 per square foot.  Fuentes’ costs are double, and his straw-bale homes ring in at around $200 per square foot.  But it’s still well below what he says other architects of super-efficient construction charge ($300 per square foot) because of expensive materials like foam-insulated panels. 

 

Even with stratospheric energy efficiency, Fuentes says straw-bale isn’t for everyone, describing many of his clients as willing (and able) to make a “legacy investment” in their home.  Straw-bale wall panels can be as thick as 18 inches, and Fuentes says that the self-absorbed who’ve bought into “bigger is better” don’t choose straw bale.   

 

Even though he’s tried to make the process drama-free, it’s not always that way, recalling one client whose wife, they discovered, was allergic to straw.  Once the walls were sealed, though, he said the problem was solved. 

 

While Fuentes’ production process may not be a home-building game changer, the energy savings that straw bale affords cannot be ignored.  “This makes zero-energy affordable,” he says.  “And today’s renewable technology at today’s prices possible.”  

 

-Melissa Baldridge, GreenSpot

Views: 224

Tags: Baldridge, Boulder, Brian, Fuentes, GreenSpot, Melissa, bale, building, efficiency, efficient, More…energy, green, high, houses, straw

Comment

You need to be a member of Home Energy Pros to add comments!

Join Home Energy Pros

Comment by Shade Structures on January 31, 2013 at 5:26pm

I read an article about using solar panels and placing them on window blinds. I think that is a great idea.

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Hal Skinner replied to Hal Skinner's discussion How our ceramic based RCC works in the group Radiant Control Coatings
"Hey Tom, I will find the ORNL repoprt and post it.  It was a test on a ballasted roof sample.…"
5 hours ago
Tom Mallard replied to Hal Skinner's discussion How our ceramic based RCC works in the group Radiant Control Coatings
"So it seems that what you're saying is for heat-transfer the stuff has little resistance or…"
6 hours ago
Hal Skinner added a discussion to the group Radiant Control Coatings
Thumbnail

How our ceramic based RCC works

How our RCC worksEveryone knows, understands and accepts that RCCs reflect heat away from roofs,…See More
7 hours ago
Mike Kandel posted a discussion

Earn BPI CEUs at 3rd Annual Building Performance Forum

If you're searching for BPI CEUs, you'll find plenty at the 3rd Annual Building Performance Forum…See More
12 hours ago
Mike Kandel added a discussion to the group Building Performance Institute (BPI)
Thumbnail

Earn BPI CEUs at 3rd Annual Building Performance Forum

If you're searching for BPI CEUs, you'll find plenty at the 3rd Annual Building Performance Forum…See More
12 hours ago
Sean Lintow Sr commented on Christopher Morin's blog post UPDATED: Big Changes for Duct Testing in MA
"4% TOTAL Ted - Leakage to outside was stripped from the codes & for good reason"
15 hours ago
tedkidd commented on Christopher Morin's blog post UPDATED: Big Changes for Duct Testing in MA
"Wait!  4% total leakage or 4% leakage to outdoors? "
16 hours ago
Tom White's video was featured

Alliant Energy's PowerHouse TV: Sealing Leaky Ductwork

The PowerHouse television shows are written and produced by Alliant Energy, an energy services company based in Madison, Wis. The first PowerHouse episode was aired in September 1996 on KCRG-TV9 in Cedar Rapids, Iowa, and appears in six broadcast…
18 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service