FREE RESNET EnergySmart Contractor Course with Green Training USA

         

The RESNET EnergySmart Contractor designation is a company credential (one full-time employee must complete training and pass the exam). It allows you to work with homeowners to improve their comfort and safety, and help them reduce their energy bills.

You will be credentialed to work in concert with certified energy auditors to complete home performance improvement work in compliance with RESNET's work scope standards of practice. Begin the online course immediately and take up to 14 days to complete.


Is It Really FREE?

Yes. Completely free. No strings attached. Click on link below to get started or call us at 1-800-518-1877 for more information.

http://www.greentrainingusa.com/resnet-energysmart-contractor-free-...

 

        

Views: 82

Comment

You need to be a member of Home Energy Pros to add comments!

Join Home Energy Pros

Comment by Robert D York Jr on February 10, 2013 at 7:12am

Signed up for this course today. Already BPI Analyst/Envelope Certified, but every little bit helps.

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
28 minutes ago
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
1 hour ago
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
2 hours ago
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
3 hours ago
Lars olsen posted a blog post
11 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"The heat exchanger gets burnt out, if presser is to high or if mix is to rich, then I see holes in…"
21 hours ago
Hans Joachim Preiss replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Good discussion. I came across this comprehensive presentation by Gas Consultants on the effects at…"
22 hours ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Excellent reply Hans. I think that there isnt' a good general answer to this question but that…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service