The U.S. Department of Energy (DOE) published new minimum energy efficiency standards for residential central air conditioners and heat pumps today. The new standards, which are based on a negotiated agreement, will reduce air conditioner and heat pump energy use by about 7%, translating into hundreds of dollars in electricity bill savings for consumers over the life of their equipment.
A federal advisory committee working group concluded the negotiations and signed the term sheet on which the new standards are based last January. The working group included representatives of manufacturers, contractors, distributors, state government, utilities, and energy efficiency advocates.
The standards’ compliance date, 2023, was a key element of the negotiations because manufacturers wanted to align changes to the minimum standards with the expected phase-down of current refrigerants. Today’s most common refrigerant used in central air conditioners and heat pumps – R410A – will be phased out under the terms of the recently concluded Kigali agreement, a global agreement supported by both manufacturers and environmentalists designed to eliminate the most environmentally-harmful refrigerants. Likely replacements for R410a include R32 and R452B.
A new test method for measuring the energy efficiency of central air conditioners will take effect at the same time as the new standards. The new test method will yield efficiency ratings that are more representative of field performance.
On a national basis, the standards will save 3.2 quads of energy, or about 340 billion kWh cumulatively from products sold over thirty years. DOE estimates consumers will save between $2.5 billion and $12.2 billion in total.
The new standards will supersede those currently in effect, which also were negotiated among stakeholders. The existing standards vary by region for air conditioners, and the new standards maintain the regional approach. Heat pumps will continue to have a single, national standard.
Based on DOE’s analysis, manufacturers can meet the new standards with improved heat exchangers, better outdoor fan motors, and other design improvements. Switching to new refrigerants will also boost efficiency, helping manufacturers to comply with the new standards. Products with efficiency performance significantly above the new standard are already on the market today, providing additional savings opportunities for consumers and programs such as those run by utilities designed to save even more.
Many of the largest energy-saving DOE standards completed in the last year have been based on similar consensus agreements, including the recent standards for roof-top air conditioners (which will save more energy than any other standard in DOE history) and pending standards for swimming pool pumps which are expected to be published soon.
- Andrew deLaski
Andrew deLaski is the Executive Director of the Appliance Standards Awareness Project. At ASAP, he coordinates national advocacy efforts related to federal efficiency standards and advises state policymakers and advocates interested in state level energy efficiency standards policy.
This blog originally appeared on www.homeenergy.org.