If you haven't been paying attention, LED's for the home are dropping in price like crazy. 

I first put up a post on the best LED A19 bulb for 60-W and 40-W replacements with pricing pulled from Amazon.

But then Cree came out with their bulb and totally blew the field away.

You can see a comparison I put together at the bottom of this post.  When you factor in price, efficiency, and warranty, no other manufacturer comes close to what Cree is currently offering.

Are LEDs cheaper than CFLs?  Nope, not even close, but they're getting closer.

Plus, they don't contain mercury (no need for special recycling), their lifespan isn't shortened by frequent on/off (like my CFLs in my kitchen are with my occupancy sensor), and they will last much longer than CFLs.

I have 4 LED bulbs in my home, and I still use mainly CFLs, but my thinking has changed recently and I'm taking a much closer look at LED bulbs.  How about you?

Name   Color temp Warranty (Yrs) Lumens Watts Lumens/Watt  Price  Lumens/Watt/Price
                 
Philips AmbientLED 2690 6 805 12.5 64.4  $16.65 3.9
Cree 9.5W 2700 10 800 9.5 84.2  $12.97 6.5
                 
Feit Electric 5000 2 800 13.5 59.3  $16.00 3.7
Cree 9W 5000 10 800 9 88.9  $13.97 6.4
                 
Maxxima LED 2700 3 465 7 66.4  $9.99 6.6
Cree 6W 2700 10 450 6 75.0  $9.97 7.5

Views: 427

Tags: bulb, cfl, comparison, cree, led, vs.

Comment

You need to be a member of Home Energy Pros to add comments!

Join Home Energy Pros

Comment by Chris Kaiser on April 18, 2013 at 1:48pm

David,

That is pretty surprising!  I would expect something like that from a CFL...but not from an LED bulb.  You think they'd figure out how to package something like that.  How did the ones you got that weren't broken work out?

Comment by David Meiland on April 17, 2013 at 2:47pm

Based on a couple of blog posts I read here, I decided to order some of the CREE 9w LED bulbs listed above. I ordered a package of 6 from Home Depot online, since I don't live anywhere near a store. The first shipment was back-ordered a while, and when they arrive, 3 of them where shattered INSIDE their packaging. OK, I thought, an odd occurrence, but let's try again. The replacement order arrived today, and 2 of them are broken. HD has been good about handling the replacements, but this is ridiculous. Probably oughta buy these in the store if you want to try them...

Comment by David Meiland on March 26, 2013 at 7:04am

We are mostly LED now, although we do have a few incandescents lurking here and there, and I have (24) T8s in my shop. Previously we were mostly CFL, but they don't compare to LEDs, not even close. The cost of what I bought a year ago vs. the same stuff today... huge price drop. Oh well, I didn't think they would drop so suddenly.

Comment by Dale Stephens on March 26, 2013 at 6:22am

I replaced 35 incandescent bulbs back in November 2012 and paid an average price of $25.28. Replaced many CFL and so far very satisfied with the results except for two issues: 1.) RF Interference (RFI) with my garage door opener see LED RFI, and 2.) bulb flicker with 4 recessed can lights in the living room on a 3-way dimmer. With other home/energy improvements our energy bill last month was less than $75 USD.

Videos

  • Add Videos
  • View All

Twitter

Latest Activity

Paul Scheckel posted a blog post

Renewable Rant: Traditional Energy!

Why, when I open up a newsletter or market evaluation report about “traditional energy” markets, do…See More
3 hours ago
Rob Madden, Solar Home Broker's discussion was featured

Indoor Air Quality Monitors and Meters

I'm considering purchasing the AirAdvice for Homes indoor air quality monitor but it seems to have…See More
4 hours ago
Luis Hernandez's discussion was featured

ERV Configuration

Greetings everyone,     I did an energy audit on this new home that is too tight and needs…See More
4 hours ago
Kim Tanner's discussion was featured
4 hours ago
John Nicholas's discussion was featured

Slab Edge Insulation - A Side Thread to Melissa's Question

Melissa Baldridge inquired about installing slab edge insulation on a potential E-Star certified…See More
4 hours ago
Melissa Baldridge's discussion was featured

ENERGY STAR - Slab Insulation

Folks,Let's say I have a client who's building slab on grade and intending to certify E-STAR.  I'm…See More
4 hours ago
Sean Maxwell's discussion was featured

Blower Door Databases: ATTMA and Retrotec rCloud

Hi guys,We're pushing for blower door testing in the building code here in Australia and we think…See More
4 hours ago
Bob Blanchette's discussion was featured

Real World Ceiling Fan CFM

Has anybody done testing on delivered CFM of ceiling fans? Energy star has a test room where the…See More
4 hours ago

© 2016   Created by Lawrence Berkeley National Laboratory.   Powered by

Badges  |  Report an Issue  |  Terms of Service