AEROSEAL Seals Leaky Ducts From the Inside Out.

Seal Your Leaky Ducts Now with AEROSEAL, UL-listed.

 

It is not uncommon to have your ducts leaking by 20% and sometimes even 30% or more which means lost heating and cooling to your living space. With new ‘green’ building practices duct work usually remains within the condition living space but the majority of prior built homes have ducts in unconditioned spaces such as attics, basements and crawl spaces.

Once the duct work is in place with in walls and other hard to reach locations it has been in the past hard to repair leaks and faulty workmanship. Now you do not have to rip out old leaky ducts with this new vapor sealer that is injected into your ducts.

Aeroseal is a nationwide company, 5 dealers in Connecticut, with a product that is a vinyl sealing material that starts off as a gas vapor in your ducts and seals cracks and holes up to 5/8 inch. The sealant is UL-listed for smoke generation and flame spread with additional testing by UL shows no signs of mold growth or erosion. The sealant is a water base solution prior to application that contains two chemicals, vinyl acetate polymer (VAP) and 2-ethyl-1 hexanol (2E1H). Both chemicals are considered nontoxic by OSHA.

The process for a normal size home takes about a day and leaves no lingering odor and comes with a 10 year warranty.

Installation process consists of an Air Duct Diagnostic and Inspection to determine how much duct leakage there is with some homeowners having saved up to 40% on their energy bills.

  • Pre-seal test as baseline for duct leakage
  • Block off registers.
  • Inject Aeroseal into duct system.
  • Cracks and holes sealed.
  • Computer and sensors measure and control process.
  • Post-seal test and measurements.
  • Complete Report and certificate printed for record of improvement.

Aeroseal has won the “Energy 100” award from the US Department of Energy (DOE) along with being rated as one of the 23 most beneficial technologies to the American consumer from DOE.

 

David Popoff is a Connecticut license real estate agent in lower Fairfield County. He has lived and worked in the area for over 30 years and now reside in Darien since 2004.

  • Green Affiliations.
    • Realtor GREEN designation by the National Association of Realtors.
    • David Popoff is an accredited LEED Accredited Professional (LEED AP) Homes and USGBC member of the Connecticut chapter (CTGBC).  
    • Associate member and an accredited Certified Green Professional (CGP) of National Association of Home Builders (NAHB) and the local chapter HBRA-Fairfield County, Ct.
    • Member of the HBA CT Green Homes Council.
    • GPRO Construction Management Certified by Urban Green Council, USGBC NY.

Views: 238

Tags: Energy, HVAC, Saving, Tips, repairs

Comment

You need to be a member of Home Energy Pros to add comments!

Join Home Energy Pros

Comment by John Pitek on March 3, 2013 at 5:57pm

In this recent video I interview Neal Walsh of Aeroseal covering how the product works, what the installation process is like, what the homeowner can expect to save, why it's safe and how much it typically costs: Duct Sealing with AeroSeal I hope you find it useful. - Johnny P

Featured Forum Discussions

Too many BTU's. Too much horsepower?

Started by Steve in General Forum. Last reply by Eric Kjelshus on Saturday. 4 Replies

Stack/wind pressure and flow networks.

Started by Daniel James Grundy in Training. Last reply by Daniel James Grundy on Thursday. 5 Replies

BDT with vermiculite in hollow CMU walls?

Started by Brad Cook in General Forum. Last reply by John Nicholas on Thursday. 2 Replies

Strange IR Image

Started by Larry Nissman in General Forum. Last reply by Brad Cook Mar 9. 7 Replies

Videos

  • Add Videos
  • View All

Latest Activity

Charles Maier is now a member of Home Energy Pros
6 hours ago
Derrick Brodanex joined allen p tanner's group
Thumbnail

Energy Auditing Equipment for Sale, Trade or to Purchase

Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
yesterday
Eric Kjelshus replied to Steve's discussion Too many BTU's. Too much horsepower?
"Its more about run time with high RH removing, than to large over sized AC unit, in houses.  …"
Saturday
Sarah OConnell posted a blog post

Crowdsourcing for Innovation

Share Your Ideas!Novel Building Envelope Design for Increased Thermal PerformanceIn 2014, more than…See More
Friday
Colin de Paor is now a member of Home Energy Pros
Friday
Walter Ahlgrim replied to Steve's discussion Too many BTU's. Too much horsepower?
"The 5 ton system you have is not 500 hp racecar engines they are 500 hp truck engines. The duct…"
Friday
Daniel James Grundy replied to Daniel James Grundy's discussion Stack/wind pressure and flow networks.
"So I wanted to start with a basic who can help then go into more detail later. But yes find…"
Thursday
Daniel James Grundy replied to Daniel James Grundy's discussion Stack/wind pressure and flow networks.
"My tutor got back to me and while areas don't quite feel right a little to much assumptions…"
Thursday

Home Energy Pros

Welcome to Home Energy Pros – the unique digital community by and for those who work in the home energy performance arena.

Home Energy Pros was founded by the developers of Home Energy Saver Pro (supported by the U.S. Department of Energy) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network. Please honor our Guidelines

© 2017   Created by Lawrence Berkeley National Laboratory.   Powered by

Badges  |  Report an Issue  |  Terms of Service