I don’t believe this is an industry specific issue but we do seem to have an excess of acronyms. 

For example we have RESNET, HERS, BPI, LEED, CSG, ACCI, ANSI, OSHA, WISHA, OMG, & LMAO! 

Confused yet?  No – then let’s try these on for size… ACH50, ACHNAT, SIPS, DMHP, HP, WH, HVAC, CFM, ELA, SLA and IECC, MEC, ASHRAE but don’t forget NYC! 

BTW can you name EPA, HERC, OSB, PVC, ABS, BD, DB, MDF, MDO, SEER, HSPF, HRV’s, ERV’s, DOE, NGBS, BIA, PV, UV, UVA, UVL, DHW, IAQ, Kwh, Mmbtu and just plain old BTU’s!

Still – maybe you live in one of these areas?  PNW, EC, SW, NE, DS,

Wait we still have the basic building blocks of our businesses – CEO, CFO, COO, LLC, MGR, INC, QR, QC, QA, all which will eventually lead us to the AARP! 

Just looking through the recent builder magazine and we find LCA, LCC’S,  LED, CFL, GBI, EPD’S, ASTM, NAHB, IGCC which came about way before GEN X, or GEN Y. 

Now 4COL we can wrap it up with the last couple (hahaha) ICF’S, TOD, ULC, MTC, HUD, REIT, COAC, FAX, NARI, NKBA, WBMA, LP, T&G, TDI, MDI, NYSE, NYSAR, GBC, MSA, CAR, GLVAR, LIRA, USA, US, APR, ABI, and last but not least THISWILLNEVEREND..! 

I’m sure we have covered them all now!  JK lol

Views: 143

Comment

You need to be a member of Home Energy Pros to add comments!

Join Home Energy Pros

Comment by Bruce Navin on January 17, 2012 at 8:29am

You forgot the one that comes up when we walk into that odd house....WTF!

Comment by William Blair on January 12, 2012 at 3:55pm

Kent... don't forget HUD spelled backwards!

Comment by Evan Mills on January 8, 2012 at 10:07pm

OMG!

Comment by Bud Poll on January 6, 2012 at 3:15am

As much as I hate them, I also fall victim to using them.  The solution is some software.  A "mouse over" selection each time we type one, that lets the author quickly select which meaning applies as there are duplicates.  When someone is reading and comes across one of these abbreviations, a quick mouse over would reveal the intended decoding and most of the aggravation would be gone.  Let's see if the software experts take note.

Bud

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Bryan Pringle replied to Bryan Pringle's discussion Dense packed cellulose in basement?
"I am getting a lot of "bad idea" push back on this.  I fully understand that…"
3 hours ago
Greg Mitchell commented on Larry Ralph Jr's blog post Top 7 Worst Crawl Space Repairs
"Spray Foam should be used in crawlspaces.   To learn about closed cell foam in crawlspaces…"
3 hours ago
Jerry Lawrence posted events
yesterday
Morgan M Audetat replied to Bryan Pringle's discussion Dense packed cellulose in basement?
"Right you are. You have to ask: what will the cellulose contribute.  Here in Minneapolis we…"
yesterday
Morgan M Audetat replied to Tony Hicks's discussion Slab-on-grade Insulation
"All slabs float. We have been installing radiant floors on various slab constructions since the…"
yesterday
Tony Hicks replied to Tony Hicks's discussion Slab-on-grade Insulation
"2" XPS foam. I'd love an R-20. Having foam thick enough to get an R-20 would be…"
yesterday
Morgan M Audetat replied to Larry Schaffert's discussion How to correctly insulate exterior wall in a 1900 house?
"Sorry, I did missed the "siding nailed directly to the framing", my grandfather would…"
yesterday
Morgan M Audetat replied to Larry Schaffert's discussion How to correctly insulate exterior wall in a 1900 house?
"My own farm house is sided with 1/2" t&g pine boards and vinyl. We foamed then from the…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service