I run an energy program in the mountains of Colorado. We have a lot of homes without existing duct work and older style wall-mounted furnaces. I've been looking for a decent upgrade choice for my clients - so far Rinnai seems to be the brand of choice for most heating contractors.  Problem is they have an AFUE of only .82 at the max, so don't qualify for high-efficiency furnace rebates through our program.  

I recently discovered the Energy Saver 90 Plus from Empire Heating, a direct-vent wall mounted unit with an AFUE of .90.  I haven't been able to find any good information about the reliability and quality of these units, and I am distrustful of any company that manufactures ventless heaters, as Empire does.

Here is a link to the product I am referring to: http://www.empirezoneheat.com/ehs/index.php?view=ultrasaver-high-ef...

Generally speaking, what other options would be suitable to improve health and safety, as well as efficiency, for homes w/out duct runs?  I am talking affordable options as our community generally can't afford big expensive upgrades.  Pellet and wood stoves are also options but I'd prefer to hear about more natural gas options.

Thanks in advance!

Views: 241

Tags: .90, AFUE, Direct, Empire, Equipment, Heating, Mount, Vent, Wall

Comment

You need to be a member of Home Energy Pros to add comments!

Join Home Energy Pros

Comment by Bob Blanchette on March 20, 2014 at 4:43pm

Don't forget you have to deal with condensate removal on a 90% heater. Could be an issue for retrofit installations.

Comment by Cameron Millard on March 20, 2014 at 8:21am

Bob, we administer rebate funds to help people overcome payback costs for upgrades.  Agreed that 10% isn't that big of a difference; hence my dilema in supporting something like this.  I have given out rebate funds for 80% AFUE wall-mount replacements in the case of dangerous situations (replacing a ventless heater in a home, for example); I'm thinking the 90% would be a better justification for efficiency funds but without good practical experience with this particular product I am hesitant.  

Comment by Bob Blanchette on March 18, 2014 at 7:10pm

I replaced my own 80% with a 90% furnace last fall, made no noticeable difference in the gas bill. The payback time for going from 80% to 90% just isn't there unless you can buy the 90% for cheap.

Comment by Cameron Millard on March 18, 2014 at 12:30pm

Bob, price point is similar to a small furnace but without installation costs associated with duct runs.  I like your idea of installing a small furnace with registers off the plenum feeding several rooms; my building science mentor did something like that at his home and it worked out pretty well.  However, I do see demand here for wall-mounted furnaces.  We have an old housing stock (1880's-1950's), lots of small homes without much room for a conventional furnace.  Wall-mounted units like those made by Rinnai are quite popular and are often combined with small electrical heaters dispersed throughout the home.

Also, these do plug in so I'm not sure they work in a power outage?

Norman, thanks for chiming in about Empire products.  I just got word that some of our Colorado weatherization agencies will install wall mounted units; I think the jump from an 80 AFUE to a 90 would be a great gain for efficiency in the right situations.  The 90 Plus from Empire does require a condensate line w/either a pump or gravity feed into an appropriate drain; this complicates things when the location is not right and the home is on a slab, for example.

Comment by Norman Bair on March 18, 2014 at 10:18am

Wisconsin's weatherization program replaces space heaters infrequently.  So I am interested in how well these perform. 

Our 1900+ Ft2 condo uses the 90% Empire Mantis fireplace for heat.  It was replaced on warranty after three years.  The replacement has worked for three additional winters.  The blower fan is very noisy.  Although it tests at 90% with a combustion analyzer, this must be discounted for the condensate that is pumped to a tray above the firebox and evaporated into the condo.  I clean the stainless steel tray with baking soda twice a year.  The original fireplace had the stainless steel tray eaten through at the welds and the inducer fan motor failed.  It gives out great heat.

Comment by Bob Blanchette on March 15, 2014 at 8:09am

There isn't much demand for these. Wall heaters are purchased due to low cost, most will spring for central systems before they will pay to upgrade to a 90% unit. Others buy wall units because they will work in power outages, but the 90% defeats this also. Other than getting rebate money, there is no reason to sell this product.

How does the price point of this product compare to a small 90% furnace? Frame in a base/closet for the furnace and use bottom for return/top for supply. Centrally locate furnace in house and have registers come right of the plenum to feed several rooms at once.

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Kurt Shafer replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"Graham, Here are some facts Whole house fans preceded air conditioning by decades - example  -…"
13 minutes ago
Brice Fawley commented on Brandon Walton's event Efficiency First AZ is Hosting Huge Meeting August 20th!
"This is a must attend. The future of the Home Performance industry in Arizona is a hot topic and we…"
38 minutes ago
Graham Irwin replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"Kurt, The "large fan" is a whole house fan moving anything from 1000-4000 CFM. By…"
1 hour ago
Kurt Shafer replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"Graham, what "large fan" are you referring to?  I am fascinated by your comment…"
9 hours ago
Profile IconTom Mallard, Eugene Swier and 2 other members joined Hal Skinner's group
Thumbnail

Radiant Control Coatings

A group where people who work with radiant barrier coatings can let others know all of their uses.See More
10 hours ago
Graham Irwin replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"I think it is important to check the energy consumption of such a large fan, even assuming it can…"
11 hours ago
Hal Skinner added a discussion to the group Radiant Control Coatings
Thumbnail

Rooftop A/C units and exposed ductwork

Lets start a discussion about rooftop A/C units and exposed ductwork. The worst place to put a…See More
12 hours ago
Richard Beyer posted discussions
12 hours ago
Brandon Walton replied to Brandon Walton's discussion EFAZ and APS Hosting Huge Welcome Party!!
13 hours ago
Brandon Walton shared their discussion on Facebook
13 hours ago
Brandon Walton posted a discussion

EFAZ and APS Hosting Huge Welcome Party!!

If your in Arizona on August 20th, stop on by and check it out!APS Home Performance Program Q&A…See More
13 hours ago
Brandon Walton posted an event

Efficiency First AZ is Hosting Huge Meeting August 20th! at Rennick's Restaurant in the Hilton Phoenix Airport Hotel

August 20, 2014 from 5:30pm to 7pm
APS Home Performance Program Q&A w/new leader Maggie Gibbs!Join Efficiency First Arizona (EFAZ)…See More
13 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service