In years past, the idea of the “passive house” was only a dream. In concept form, the passive house was one that minimized energy losses and operated at maximum energy efficiency. The result would be a home with little to no monthly energy expenses and a fraction of the environmental impact of most homes. Amazingly, the passive house is no longer just a dream; in fact, it’s become a reality. Several companies are able to build passive homes for everyday consumers, creating a huge shift in what it means to have an energy-efficient home.
There are several elements of a passive home that can be incorporated to achieve this ultra energy-efficient status. The following are just a few key elements of today’s passive homes:
Though there are many important and technologically advanced elements to a passive home, this type of residence isn’t out of reach for many Americans. In fact, the cost of building a passive home is only about 10% more than the cost of building a standard home. When you factor in the long-term savings of having little to no monthly energy expenses, there are actually savings in store for those who choose to build a passive house.
To find out more about passive houses, check out Phoenix Home Performance today at www.zerohomeenergy.com.
Comment
Comment by Jeff Wendland on May 4, 2012 at 11:21am Hi Paul,
We are certified through PHIUS and follow the Passive House standards. We show our certifications our certifications page.
Comment by Cody Farmer on April 20, 2012 at 5:58am Great summary Jeff. I've found Passive House to be a great solution to the on going debate of knowing how green it is. This is a game of energy reduction and PHPP has become a fantastic baseline. Creating a successful Passive House is truly dependent, at the moment on the new information and training coming from PHIUS, PHI, and several others. We need real green materials. GUTEX insulation for 1 easy example. The beauty of the standard is that it's open forum, no 1 type of ingredient or way to obtain your Rx of building materials. It's dangerous in the same fashion however, and I'll be posting a sign at the Passivista, which will read please do not assume that using the same materials, R-vals, and construction methods on display at this site that you will not create a building that will heat poorly in the winter or over heat in the summer. Consult a Passive House Designer or Consultant or other professional with extensive building science background. Again we need quality materials in the field that are really green. We've been in the field a lot lately, but here are some pictures of the Passivista Passive House
Comment by Paul Bowman on April 19, 2012 at 4:29pm Your site uses the name Passive House, but it doesn't say anything about a specific standard or certifying organization. Is there an organization, e.g. PHIUS, involved? If so, why don't you provide that clarifying info on your site? If not, why are you using the name?
Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
Mark Richardson replied to J.C. Martel's discussion Disasters & sustainable energy
Eric Kjelshus replied to Johnny Ritzo's discussion Selecting a Water Heater
Bachi Brunato replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans
Bachi Brunato's discussion was featured
Johnny Ritzo's discussion was featured
Tom Delconte's blog post was featured
Christopher Morin's blog post was featured
Mike Rogers's blog post was featured
Mike Rogers posted a blog post© 2013 Created by Lawrence Berkeley National Laboratory.
You need to be a member of Home Energy Pros to add comments!
Join Home Energy Pros