We're Not Paying Enough Attention to Kitchen Ventilation

Exposure to kitchen pollutants is a significant and overlooked health hazard in homes. The home performance industry pays great attention to protecting against exposures to combustion pollutants from water heaters and furnaces, but very little attention to an unvented combustion device that is used nearly every day: the kitchen range. A recent LBNL study looked at the chronic health impacts of exposure to pollutants from cooking burners and determined that the risks are not trivial, especially considering our findings on the prevalence of kitchen ventilation and its use (12).  And the popular media are beginning to take notice (herehere, and here).  

Kitchen ventilation is needed in homes with either electric resistance or gas cooking appliances as both types of burners produce pollutants and because cooking itself creates pollutants, odors, and excess moisture.

The need for kitchen ventilation isn’t on most people’s radar as a health issue. It should be. As we work to create healthy, low-energy homes, we must recognize that “build tight; ventilate right” includes effective kitchen (and bath) ventilation in addition to baseline, “whole-home” mechanical ventilation. Pollutants generated in a leaky home get diluted with infiltrating outdoor air. Pollutants in tight homes stay put. A tight home with ineffective kitchen ventilation and even a moderate amount of cooking is a recipe for bad IAQ and potential health impacts.

Right now, there are four main problems with US residential kitchen ventilation:

  • Many existing homes lack any kitchen ventilation.
  • Homes are being built without kitchen ventilation because it is not required in building codes.
  • Even in homes that have kitchen ventilation, few people routinely use it.
  • Even when they are used, many kitchen ventilation systems are only moderately effective.

These problems are at different scales, and have different causes and potential solutions. But they all need to be addressed together if we want to improve the efficacy of our kitchen ventilation, and to create comfortable low-energy homes that are also healthy.

Building codes and standards, design, education, and marketing, among other approaches, all must play a role in addressing these challenges. But the first step is to recognize them as problems and begin to generate the will to work together to solve them.  

To view the full report, “Addressing Kitchen Contaminants for Healthy, Low-Energy Homes”, click here. Also, look for a more detailed look at the study results in a future Home Energy Magazine issue.

Views: 220

Comment

You need to be a member of Home Energy Pros to add comments!

Join Home Energy Pros

Comment by Chris Stratton on April 7, 2014 at 12:43pm

Graham, great points. I'm a fan of induction. If a full induction range is infeasible, a portable single burner induction cooktop can be an affordable and versatile replacement or complement for a gas or electric resistance range.  

Comment by Graham Irwin on April 3, 2014 at 9:45am

Good idea to stop burning gas inside, induction cooktops eliminate combustion and deliver far more of the heat to the cookware, an additional benefit during cooling season.

Comment by Chris Stratton on April 2, 2014 at 10:58am

Bob, I agree. Vented to the outside is a great place to start. Next on the priority list for me would be the noise level.

Comment by Bob Blanchette on March 30, 2014 at 6:54am

The first thing that could be done is get rid of those recirculating range hoods that 90% of new homes use. Require all range hoods to be vented to the OUTSIDE.

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

tedkidd commented on Scott Mellberg's blog post Lessons from Energy Efficiency Advisors: Getting Homeowners Onboard with Home Performance
"Absolutely agree Ben, "How much do I use, how much do others use, and what is my reasonable…"
36 minutes ago
Profile IconTauran Ivall, Alex Burnham and Annika Brink joined Home Energy Pros
1 hour ago
David Eakin replied to Jamie Kaye's discussion Flickering LED lights
"I also thought that, but I tried to put a CFL in the A-19 outside fixture at my…"
1 hour ago
Ben Jacobs commented on Scott Mellberg's blog post Lessons from Energy Efficiency Advisors: Getting Homeowners Onboard with Home Performance
" I believe a major problem of government, of energy utilities, and home energy efficiency…"
2 hours ago
Jill Lindman posted an event

EEBA Houses That Work Education & Training at Johnson County Administration Building

August 22, 2014 from 8:30am to 4:30pm
About the SessionsIntro to Houses That Work: In this session participants learn how the many…See More
3 hours ago
Glen Gallo replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"Title 24 requires whole house fans in zones 8-14 in the prescriptive path only. With many…"
4 hours ago
Jenn Saunders replied to Jenn Saunders's discussion iEnergyApp: Quickly generate professional reports for homeowners and get more contracts!
"Hey Tom, You are most welcome.  iEnergyApp is not free, but it is reasonable and pays for…"
4 hours ago
Jenn Saunders posted a photo

Automatically Generate Clean Simple Reports for Homeowners

Stop spending hours cropping and resizing images, formatting and reformatting a Word document to…
4 hours ago
Eric Sperline added a discussion to the group Energy Auditing Equipment for Sale, Trade or to Purchase
Thumbnail

Beware ebay seller "supermomofps"

I bought a blower door system on Ebay from "supermomofps"  The item was never sent and…See More
5 hours ago
Larry Nissman replied to John Shillito's discussion Fixing a water heater?
"I have to agree with Kurt. 2000 ppm is exceedingly high. I have tested hundreds of hot water heater…"
5 hours ago
Tom White's video was featured

Passive House Revolution - Film Trailer

Looking for energy-efficiency in buildings? There's no need to wait for new technology - Passive House buildings use 80-90% less heating and cooling energy.
5 hours ago
Diane Chojnowski joined Hal Skinner's group
Thumbnail

Radiant Control Coatings

A group where people who work with radiant barrier coatings can let others know all of their uses.See More
5 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service