Cameron Millard's Blog (1)

90% AFUE Wall Mount Furnace

I run an energy program in the mountains of Colorado. We have a lot of homes without existing duct work and older style wall-mounted furnaces. I've been looking for a decent upgrade choice for my clients - so far Rinnai seems to be the brand of choice for most heating contractors.  Problem is they have an AFUE of only .82 at the max, so don't qualify for high-efficiency furnace rebates through our program.  

I recently discovered the Energy Saver 90 Plus from Empire Heating, a…

Continue

Added by Cameron Millard on February 26, 2014 at 7:54am — 6 Comments

Latest Blog Posts

Most Popular Blog Posts

Blog Topics by Tags

Monthly Archives

2014

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

tedkidd commented on Diane Chojnowski's group Hall of Shame
"Give this thread a bump - here's my "bad" album and some of the…"
4 minutes ago
Eric Kjelshus commented on Adam Swain's blog post Top Worst Crawl Space Insulation Ideas
"6) Radiant barrier- under the gravel is just a barrier but with holes each square inch its not a…"
8 minutes ago
tedkidd replied to Luis Hernandez's discussion Distribution Efficiency and heating safety factor in TREAT in the group TREAT Software
"It is very common to find equipment grossly oversized. I mean 1.5 - 2x Manual J and 2-3x the size…"
11 minutes ago
tedkidd replied to Luis Hernandez's discussion Basic Heat loss information in the group TREAT Software
"Luis,  Click "selected reports, energy savings and use, design heating and cooling…"
21 minutes ago
Ed Minch replied to Kurt Shafer's discussion Where can I find the best radiant barrier to install under my roof?
"The important thing here is the surface temperature of the ceiling against the attic as compared to…"
30 minutes ago
Profile IconSharon DeRidder, Jason Hiep, Chris Chmiel and 4 more joined Home Energy Pros
1 hour ago
John Watson Ley replied to Luis Hernandez's discussion Distribution Efficiency and heating safety factor in TREAT in the group TREAT Software
"Luis, Good Evening, John of NY Construction Pros here. I don't think you need to worry about…"
13 hours ago
Mike Kandel added a discussion to the group Building Performance Institute (BPI)
Thumbnail

BPI Introduces IDL Certification for Duct and Envelope Tightness Testing Verification

Expand your knowledge, expertise and opportunity with BPI's BRAND NEW Infiltration and Duct Leakage…See More
17 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service