Evan Mills's Blog – October 2010 Archive (3)

Kermit was Right: It's NOT Easy Being Green

Download a more fully fleshed-out and illustrated version of this saga here.

It’s not easy being Green … even if you have a Ph.D. in the subject. Kermit was right, but I’m on a mission to prove him wrong.



Moving to a new home in mid-2008 presented a…

Continue

Added by Evan Mills on October 26, 2010 at 1:30pm — 7 Comments

Efficiency Lives -- The Rebound Effect Not So Much

While the following discussion (originally published in Climate Progress) extends to energy opportunities well outside the residential sphere, it's the latest example an overstatement of the so-called "Rebound Effect". Although there are certainly times that a portion of the…

Continue

Added by Evan Mills on October 22, 2010 at 11:30am — 2 Comments

Welcome to Home Energy Pros!

Welcome to Home Energy Pros – the unique digital community by and for those who work in the home energy performance arena.



It is no secret that we are on the cusp of a major transformation in how energy efficiency is deployed in the housing sector. After all, the U.S. President even went on television in a major…
Continue

Added by Evan Mills on October 4, 2010 at 5:00am — 4 Comments

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
9 hours ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
9 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
12 hours ago
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
12 hours ago
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
13 hours ago
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
15 hours ago
Lars olsen posted a blog post
22 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"The heat exchanger gets burnt out, if presser is to high or if mix is to rich, then I see holes in…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service