Greg Labbe's Blog – September 2013 Archive (1)

Quickest way to Field-check you Model 3 Flow Sensor!

I think the question I get asked the most is, well I dunno know, it happens a lot, enough that I would remark on it – a lot of people come up to me and they say “How do I know if my flow sensor is positioned within spec?“

My answer’s always the same, I say: “Listen. Luckily we don’t have to go all the way back to the Civil War to answer this…” ¹

The truth is, most never check, but here’s a quick easy way to ensure your Minneapolis fan’s flow sensor’s positioned properly in the…


Added by Greg Labbe on September 30, 2013 at 7:59am — No Comments


  • Add Videos
  • View All


Latest Activity

Benny hani replied to Benny hani's discussion Manual J online
"Thanks Bob"
8 hours ago
Benny hani replied to Benny hani's discussion Manual J online
"Thank you Isaac"
8 hours ago
Bob Blanchette commented on Amber Vignieri's blog post Even with Polar Vortex, Hourly Pricing Participants Saved
"Looks like the days of paying a fixed amount per KWh are rapidly coming to an end. Many utilities…"
9 hours ago
Bob Blanchette replied to Benny hani's discussion Manual J online
"Be sure the size that you ACCURATELY calculate actually gets installed. Often…"
10 hours ago
Bob Blanchette replied to Sean Lintow Sr's discussion Water Saver or Gimmick? in the group Best Practices (Residential)
"The problem is these devices NEVER pay for themselves. Water is cheap, about $3 per 1,000 gallons…"
10 hours ago
Bud Poll replied to Rob Madden's discussion Blower Door Testing on Energy Star v3 home
"Where was the blower set up, front door, other?  Was if located in an unobstructed area, not a…"
21 hours ago
David N. Armington liked John Poole's discussion Two Part Epoxy and Repair of Structural Wood
David N. Armington joined John Poole's group

Historic Home

Historic and vintage homes are significant to our cultural heritage, yet often lack energy…See More

© 2016   Created by Lawrence Berkeley National Laboratory.   Powered by

Badges  |  Report an Issue  |  Terms of Service