David Valley's Blog Posts Tagged 'massachusetts' (3)

Enhancing Your Infrared (Thermal) Imaging Scan

Wouldn't it be nice to have all your sites fully prepared for you before you arrive for an infrared scan? It can be possible if you politely ask your clients to have the home (or job site) prepared for you in order to alleviate any issues during the thermal scan. With the many unprepared infrared scans that I have completed, I have come up with a list in order for you to achieve the maximum benefit of your infrared inspections....

 

• Plan optimal times of day for your infrared…

Continue

Added by David Valley on December 17, 2010 at 8:00am — 2 Comments

Infrared Detects Piping Issues Behind Walls

pipe leaks

The problem faced by most property owners is that any moisture behind the walls, over ceilings, and under the floors are often impossible to detect until the problem is excessive and obviously visible. But, by then it’s too late and all damaged surfaces must now be replaced, along with the pipes that caused the damage. Small supply pipe leaks or waste line seepage's are common sources of water…

Continue

Added by David Valley on December 9, 2010 at 9:00am — No Comments

Infrared (Thermal) Imaging Detects Radiant Ice Melt Systems

radiant ice and snow melt pipe detection



Ice and snow melt systems are utilized in many applications throughout the state of Massachusetts. Business owners utilize snow and ice melt systems in outdoor malls, parking lots, car washes, walkways, and loading ramps to eliminate the expense of continuous snowplowing, to avoid skidding of vehicles and to prevent slip-and-fall accidents on their property.



As a…

Continue

Added by David Valley on November 7, 2010 at 2:00pm — No Comments

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Tim Jones replied to Kirsten Richnavsky's discussion Let's Play Stump the Chump! in the group Building Performance Institute (BPI)
"Was there a blech on the stove? Used to cover the flame on a gas stove, sometimes it does not have…"
55 minutes ago
Colin Genge replied to Blake Shurtz's discussion Duct blaster with asbestos?
"Two states have concluded that blower door testing does not increase the liability wrt asbestos.…"
1 hour ago
Christopher Morin posted a blog post

HVAC Industry: Who wins with High Warranties?

During the sales process, it is inevitable warranty periods will be raised.  I remember raving…See More
4 hours ago
Colin Genge replied to Kirsten Richnavsky's discussion Let's Play Stump the Chump! in the group Building Performance Institute (BPI)
"Being a novice at CO, I looked up permissible and ambient levels that appear to be 10 PPM and about…"
5 hours ago
Profile IconColin Genge, Jeff Martin and 2 other members joined Leslie McDowell, BPI's group
Thumbnail

Building Performance Institute (BPI)

BPI is the nation's premier standards development, quality assurance and credentialing organization…See More
5 hours ago
Jeff Martin replied to Kirsten Richnavsky's discussion Let's Play Stump the Chump! in the group Building Performance Institute (BPI)
"Since the obvious suspects for the CO were ruled out, certainly a head scratch moment.  If…"
5 hours ago
Joshua Moore commented on Jim Gunshinan's video
Thumbnail

GoGreen Portland 2014: The Myth of Apathy - Renee Lertzman, Ph.D

"Nice insights.  Engagement defined as a "genuine interest in collaboration, in…"
7 hours ago
Dmitri A Martin replied to Kirsten Richnavsky's discussion Let's Play Stump the Chump! in the group Building Performance Institute (BPI)
"The detectors could have been giving false positive readings due to cleaning chemicals as it is…"
7 hours ago

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service