All Blog Posts Tagged 'massachusetts' (4)

New Energy Code in Massachusetts

In July 2013, the State Board of Building Regulations and Standards (BBRS) voted to adopt the 2012 International Energy Conservation Code (2012 IECC) and ASHRAE 90.1-2010 with MA amendments as the new baseline energy code. The BBRS allowed for the new regulations to run concurrently with the current energy regulations until July 1, 2014. During that time, either set of energy regulations could be used when applying for…


Added by Everblue Training on October 8, 2014 at 6:56am — No Comments

Enhancing Your Infrared (Thermal) Imaging Scan

Wouldn't it be nice to have all your sites fully prepared for you before you arrive for an infrared scan? It can be possible if you politely ask your clients to have the home (or job site) prepared for you in order to alleviate any issues during the thermal scan. With the many unprepared infrared scans that I have completed, I have come up with a list in order for you to achieve the maximum benefit of your infrared inspections....


• Plan optimal times of day for your infrared…


Added by David Valley on December 17, 2010 at 8:00am — 2 Comments

Infrared Detects Piping Issues Behind Walls

pipe leaks

The problem faced by most property owners is that any moisture behind the walls, over ceilings, and under the floors are often impossible to detect until the problem is excessive and obviously visible. But, by then it’s too late and all damaged surfaces must now be replaced, along with the pipes that caused the damage. Small supply pipe leaks or waste line seepage's are common sources of water…


Added by David Valley on December 9, 2010 at 9:00am — No Comments

Infrared (Thermal) Imaging Detects Radiant Ice Melt Systems

radiant ice and snow melt pipe detection

Ice and snow melt systems are utilized in many applications throughout the state of Massachusetts. Business owners utilize snow and ice melt systems in outdoor malls, parking lots, car washes, walkways, and loading ramps to eliminate the expense of continuous snowplowing, to avoid skidding of vehicles and to prevent slip-and-fall accidents on their property.

As a…


Added by David Valley on November 7, 2010 at 2:00pm — No Comments


  • Add Videos
  • View All


Latest Activity

Benny hani replied to Benny hani's discussion Manual J online
"Thanks Bob"
17 hours ago
Benny hani replied to Benny hani's discussion Manual J online
"Thank you Isaac"
17 hours ago
Bob Blanchette commented on Amber Vignieri's blog post Even with Polar Vortex, Hourly Pricing Participants Saved
"Looks like the days of paying a fixed amount per KWh are rapidly coming to an end. Many utilities…"
18 hours ago
Bob Blanchette replied to Benny hani's discussion Manual J online
"Be sure the size that you ACCURATELY calculate actually gets installed. Often…"
19 hours ago
Bob Blanchette replied to Sean Lintow Sr's discussion Water Saver or Gimmick? in the group Best Practices (Residential)
"The problem is these devices NEVER pay for themselves. Water is cheap, about $3 per 1,000 gallons…"
19 hours ago
Bud Poll replied to Rob Madden's discussion Blower Door Testing on Energy Star v3 home
"Where was the blower set up, front door, other?  Was if located in an unobstructed area, not a…"
David N. Armington liked John Poole's discussion Two Part Epoxy and Repair of Structural Wood
David N. Armington joined John Poole's group

Historic Home

Historic and vintage homes are significant to our cultural heritage, yet often lack energy…See More

© 2016   Created by Lawrence Berkeley National Laboratory.   Powered by

Badges  |  Report an Issue  |  Terms of Service