Chris Laumer-Giddens's Blog Posts Tagged 'high' (4)

Designing A Perfect Residential Wall - Atlanta, Georgia

Atlanta, Georgia has a reputation for getting pretty darn hot, but it can also get pretty dang cold (No snickering from you Northerners, please!). Believe it or not, Atlantans use more energy to heat their homes than they do to cool them. The design temperature set by …

Continue

Added by Chris Laumer-Giddens on March 6, 2013 at 11:30am — No Comments

14 Design Don’ts for High Performance Homes

There are a lot of ways to design a home. Designing one for high…

Continue

Added by Chris Laumer-Giddens on February 14, 2013 at 7:30am — 8 Comments

Part II: Designing for High Performance, Controlling Heat Flow in Slab-On-Grade

In Part I of this series on designing for high performance, we discussed the control…

Continue

Added by Chris Laumer-Giddens on August 15, 2012 at 3:15am — No Comments

Designing for High Performance: Slab-On-Grade, Part I – Controlling Moisture Flow

We’re just a few weeks away from a computer generated, self-guided interactive virtual tour of the Serenbe Residence near Atlanta, Georgia (Climate Zone 3a). We’re using REVIT software to generate the 3D model, then  …

Continue

Added by Chris Laumer-Giddens on August 13, 2012 at 4:00am — 6 Comments

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

John Nicholas replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"Different houses, different problems, different approaches. A multipoint gives you a slope. The…"
2 hours ago
John Nicholas replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"Bud,  I pretty much agree with Sean's points.  Given the time it takes to set up the…"
2 hours ago
Bud Poll replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"A multi-point will take longer, but what will it do for the home owner?  Will it change the…"
4 hours ago
Sean Lintow Sr replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"Hmmm good question - personally for air-leakage I would go with multi-point, preferably run from…"
5 hours ago
Richard Beyer posted a discussion

Media Reports Spray Polyurethane Foam Insulation spontaneously combusted a $5M Connecticut Home... "The Conclusion"

OFFICE OF THE FIRE MARSHAL1212 WHITTEMORE RDMIDDLEBURY, CONNECTICUT Fire Investigation Report –…See More
16 hours ago
Profile IconDavid Hepinstall and Matthew joined Home Energy Pros
22 hours ago
Steve Leombruno posted a blog post

Static power energy box

Just wondering if You've heard of this Static power energy box that boasts energy consumption…See More
yesterday
Bud Poll replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"Hi Sean, I have a question for you.  If you were only interested in providing the best audit…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service