Everblue Training's Blog Posts Tagged 'building' (3)

New Florida Building Code Takes Effect June 30

The International Code Council and the Florida Building Commission announced significant changes to the Florida Building Building Codes that will result in safer, sustainable buildings and homes. The updated Florida Building Codes are mandatory for all new construction or rehabilitation projects with a permit application date of June 30, 2015 or later.

Now available, the …

Continue

Added by Everblue Training on June 24, 2015 at 11:01am — No Comments

New Energy Code in Massachusetts

In July 2013, the State Board of Building Regulations and Standards (BBRS) voted to adopt the 2012 International Energy Conservation Code (2012 IECC) and ASHRAE 90.1-2010 with MA amendments as the new baseline energy code. The BBRS allowed for the new regulations to run concurrently with the current energy regulations until July 1, 2014. During that time, either set of energy regulations could be used when applying for…

Continue

Added by Everblue Training on October 8, 2014 at 6:56am — No Comments

More HERS Ratings Expected in 2015

The Residential Energy Services Network (RESNET) announced its collaboration with the International Code Council last week in an effort to help home builders transition to the new 2015 International Energy Conservation Code (IECC). In the upcoming version of the residential building code, RESNET's HERS Index will be an optional compliance path — some people are saying that this compliance path represents the most significant change coming to 2015 IECC

What is the…

Continue

Added by Everblue Training on June 20, 2014 at 5:30am — 1 Comment

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Morgan, I got this below from the Knight installation manual. I note a few things, -These…"
2 hours ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
16 hours ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
16 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
19 hours ago
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
19 hours ago
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
21 hours ago
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
22 hours ago
Lars olsen posted a blog post
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service