All Blog Posts Tagged 'blower' (4)

Sparky Doubled the Air Leakage in this Home!

Sparky Doubled the Air Leakage in this Home

This is the home.

high-performance-bunglaow

This is the hole that Sparky (electrician) "innocently" made to feed a wire to the light on the front porch of the High Performance Bungalow. I discovered it a day or two after our home performance diagnostics team, Carl Seville and Abe Kruger, of SK…

Continue

Added by Chris Laumer-Giddens on November 24, 2015 at 6:08am — 4 Comments

The Better Blower Door Test for Multifamily Energy Code

Hello Ladies and Gentlemen, 

I've been thinking about the topic of multifamily blower door tests for a while, and I want to get your opinion. This is an article that I wanted to publish in Home Energy Magazine but I thought it would be better to get up sooner. It's about energy code language regarding blower door testing. When I was at Steven Winter Associates, the NY State Codes Council asked for advice about blower door testing language, so that's where this originates. I hope you…

Continue

Added by Sean Maxwell on August 27, 2015 at 12:24am — 3 Comments

New Energy Code in Massachusetts

In July 2013, the State Board of Building Regulations and Standards (BBRS) voted to adopt the 2012 International Energy Conservation Code (2012 IECC) and ASHRAE 90.1-2010 with MA amendments as the new baseline energy code. The BBRS allowed for the new regulations to run concurrently with the current energy regulations until July 1, 2014. During that time, either set of energy regulations could be used when applying for…

Continue

Added by Everblue Training on October 8, 2014 at 6:56am — No Comments

0.72 ach50 Before Drywall - This Home is already 90% Tighter than Energy Code

Before drywall was installed, I tested the infiltration (air leakage) at the Proud Green Home (PGH) at Serenbe,…

Continue

Added by Chris Laumer-Giddens on April 15, 2013 at 7:30am — 1 Comment

Forum Discussions

Latest Activity

Green ID posted blog posts
21 hours ago
Brad Cook replied to Brent Shapiro's discussion Investigating 3257KWH monthly usage issue.
"Jason's suggestion my be a quick way to isolate the high load, IF you have an old style meter…"
yesterday
Home Energy Magazine's blog post was featured

The Results Are In: These Are The Most Energy-Efficient Utilities in the US

Our first-ever scorecard of US utilities, released today, reveals striking regional differences and…See More
yesterday
Joe Konopacki replied to Brent Shapiro's discussion Investigating 3257KWH monthly usage issue.
"Brent, Using an ammeter, I would measure each 'hot' conductor leaving the fuses. (Find an…"
yesterday

Photos

Loading…
  • Add Photos
  • View All

© 2017   Created by Lawrence Berkeley National Laboratory.   Powered by

Badges  |  Report an Issue  |  Terms of Service