David Valley's Blog Posts Tagged 'Infrared' (3)

Enhancing Your Infrared (Thermal) Imaging Scan

Wouldn't it be nice to have all your sites fully prepared for you before you arrive for an infrared scan? It can be possible if you politely ask your clients to have the home (or job site) prepared for you in order to alleviate any issues during the thermal scan. With the many unprepared infrared scans that I have completed, I have come up with a list in order for you to achieve the maximum benefit of your infrared inspections....

 

• Plan optimal times of day for your infrared…

Continue

Added by David Valley on December 17, 2010 at 8:00am — 2 Comments

Infrared (Thermal) Imaging Detects Radiant Ice Melt Systems

radiant ice and snow melt pipe detection

Ice and snow melt systems are utilized in many applications throughout the state of Massachusetts. Business owners utilize snow and ice melt systems in outdoor malls, parking lots, car washes, walkways, and loading ramps to eliminate the expense of continuous snowplowing, to avoid skidding of vehicles and to prevent slip-and-fall accidents on their property.

As a…

Continue

Added by David Valley on November 7, 2010 at 2:00pm — No Comments

Infrared Imaging Uncovers Many Concealed Defects - See Images

My infrared camera detects shoddy installation of cellulose insulation in this concealed wall cavity above the door.…

wall insulation not complete



infrared_line

Continue

Added by David Valley on November 5, 2010 at 7:00am — 2 Comments

Forum Discussions

Investigating 3257KWH monthly usage issue.

Started by Brent Shapiro in General Forum. Last reply by Brad Cook 15 hours ago. 8 Replies

Earn 2 BPI CEUs by Blogging for BPI

Started by Quinn Korzeniecki in General Forum on Monday. 0 Replies

What made this chimney fall down?

Started by Eric Kjelshus in General Forum. Last reply by Eric Kjelshus Jun 15. 5 Replies

Studies on Home Energy Audit Energy Savings Potential?

Started by Julie Saporito in General Forum. Last reply by Danielle Sass Byrnett Jun 15. 5 Replies

Latest Activity

Green ID posted blog posts
11 hours ago
Brad Cook replied to Brent Shapiro's discussion Investigating 3257KWH monthly usage issue.
"Jason's suggestion my be a quick way to isolate the high load, IF you have an old style meter…"
15 hours ago
Home Energy Magazine's blog post was featured

The Results Are In: These Are The Most Energy-Efficient Utilities in the US

Our first-ever scorecard of US utilities, released today, reveals striking regional differences and…See More
yesterday
Joe Konopacki replied to Brent Shapiro's discussion Investigating 3257KWH monthly usage issue.
"Brent, Using an ammeter, I would measure each 'hot' conductor leaving the fuses. (Find an…"
yesterday

Photos

Loading…
  • Add Photos
  • View All

© 2017   Created by Lawrence Berkeley National Laboratory.   Powered by

Badges  |  Report an Issue  |  Terms of Service