"Rock wool is available in rigid product, with various densities, depending on application.
There is a product designed as drain board for foundations.
It's available in pipe insulation, batts, and blown in. Although you may have a hard time…"
-
George J. Nesbitt
- Emeryville, CA
- United States
- Featured Blogs
- Discussions (12)
- Events
- Groups (5)
- Photos
- Photo Albums
- Videos
George J. Nesbitt's Groups
-
HVAC
155 members
-
Building Simulations
63 members
-
Home Energy Ratings
91 members
-
Multifamily Buildings
116 members
-
1000 Home Challenge
99 members
George J. Nesbitt's Discussions
Duct Testing High Velocity Systems
2 Replies
Dose anyone have experience testing high velocity duct systems?I've been asked to duct test a Zhender HRV with comfoducts (2" homerun ducts).I designed & installed a hydronic high velocity system…Continue
Started this discussion. Last reply by Paul Morin Jan 10.
George J. Nesbitt's Page
Latest Activity
George J. Nesbitt replied to Jack Baikoff's discussion Measuring fresh air intake ducted to a return and no way of measuring from outside."That duct is an economizer. It's purpose is ventilation, and possibly cooling (rather than using the AC). Night time cooling works great in the western states in many places, where it's dry, and the temperatures drop at night to below…"
George J. Nesbitt replied to Mike Kandel's discussion January's Stump the Chump"Could it be that the attic is connected to other units that did not receive air sealing & insulation. So the heat loss from those units still melt ice."
George J. Nesbitt replied to Jack Baikoff's discussion Measuring fresh air intake ducted to a return and no way of measuring from outside."Not inexpensive!
Do you install it and leave it, or do you drill a hole, and have to patch?"
George J. Nesbitt commented on Christopher Morin's blog post Oil Tanks in Your Home"I have a client here on the left (west) coast that had a house sale fall through recently on the right (east) coast due to the oil tank. The buyer was from the left, and not used to them. I don't know if there is any evidence of an actual…"
George J. Nesbitt replied to Dennis McCarthy's discussion Would you like a lighting audit with your energy audit ?"I've always included lighting and appliances (pools & spas too) in my "audits". I've always assumed they were part of the "house".
But sadly our industry tends to focus on the HVAC, air sealing & insulation.
But…"
George J. Nesbitt replied to Dennis McCarthy's discussion Would you like a lighting audit with your energy audit ?George J. Nesbitt replied to George Kopf's discussion ASHRAE 62.2.2010 and the $20 app"I thought somewhere I saw mention that the 62.2 2010 standard was available for free from ASHRAE, but don't seem to be able to find it. I can find some supplements for free, but they are incomplete.
Can anyone point me to a free or cheap…"
George J. Nesbitt replied to Jack Baikoff's discussion Measuring fresh air intake ducted to a return and no way of measuring from outside."I've use my energy conservatory exhaust flow pan (on the intake grill), flow hoods can work too."
George J. Nesbitt replied to George Kopf's discussion ASHRAE 62.2.2010 and the $20 app"George,
I'll sell you my ASHRAE 62.2 2010 excel spreadsheet for $20!
I think 62.2 is fairly easy.
What we have to remember that it's a minimum standard, based on an assumed "natural ventilation" (leakage rate) of 0.15 achnat.
I…"
Paul Morin replied to George J. Nesbitt's discussion Duct Testing High Velocity Systems"if the duct leakage is relatively low, 200 cfm or less, the pressure in the duct system will be quite uniform and either location will give consistent results. If the duct leakage is high, over 500 cfm, we recommend that you do two…"
George J. Nesbitt replied to George Whiting's discussion Retrofit insulation on the roof over cathedral ceiling"Insulating above the roof deck is the way to go in this case. I am completing a simular project on my house currently.
Remove the shingles, drill & fill the existing cavities with dense pack cellulose (3.5# cuft) or fiberglass. Air seal the…"
George J. Nesbitt's discussion was featuredDuct Testing High Velocity Systems
Dose anyone have experience testing high velocity duct systems?I've been asked to duct test a Zhender HRV with comfoducts (2" homerun ducts).I designed & installed a hydronic high velocity system a few years ago. It had 25' of 12" return flex duct, and 15-20' of 6+8" sheet metal ducting, 2 + 2-1/2" branch ducting. I sealed everything with mastic.I installed the duct tester at the return, and the duct pressure at the nearest supply to the air hander, as I would on a low velocity system. I…See More
Colin Genge replied to George J. Nesbitt's discussion Duct Testing High Velocity Systems"This duct system should be tight enough that it should not matter where you test it from. I recommend you test under negative pressure to ensure you get good seals at the registers. How high was your reading and what flow range were you…"
George J. Nesbitt replied to Patrick Michaelyan's discussion Mold Growth & Draftiness Post Energy Improvements"Bud is correct
Because of the air sealing & insulation the RH in the house has increased, and now the 1 wall & some windows are cold enough that condensation happens, and mold grows.
It's important to understand that air leakage (in the…"
George J. Nesbitt posted a discussionDuct Testing High Velocity Systems
Dose anyone have experience testing high velocity duct systems?I've been asked to duct test a Zhender HRV with comfoducts (2" homerun ducts).I designed & installed a hydronic high velocity system a few years ago. It had 25' of 12" return flex duct, and 15-20' of 6+8" sheet metal ducting, 2 + 2-1/2" branch ducting. I sealed everything with mastic.I installed the duct tester at the return, and the duct pressure at the nearest supply to the air hander, as I would on a low velocity system. I…See More
Profile Information
- Company
- Environmental Design / Build
- Professional Certification
- MADD Building Scientist
- Website URL
- http://houseisasystem.com
Comment Wall (1 comment)
- At 6:02am on December 16, 2012,
Diane Chojnowski said… Hi George,
Welcome to Home Energy Pros! Feel free to join the conversation in the Forum and Groups. And share your energy efficiency photos, videos and upcoming events. If you're blogging about home performance, this is the place for you!
Don't forget to upload your profile photo. And add your location on our Member Map!
Thanks!
Diane, HEP Moderator
Home Energy Pros
Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
Latest Activity
Nick Helmholdt replied to Joshua Knittel's discussion Google Thermal View? in the group INFRARED THERMOGRAPHY USERS"Any bets on how long it will take this company to land in court?
A local energy efficiency group in…"
Matthew Redmond posted a status"Full house for NYSWDA's ASHRAE 62.2 course today. A lot of discussion on implementing this standard on NY State's diverse housing stock."
Paul Scheckel posted a blog postLess oil, more courage: Energy and Art
Hard to admit, but I'm not all fun-facts all the time. Sometimes I even pay attention to things…See More
Tom Delconte posted a blog postThe Surroundings Are Comprised of (fill in the blank) !
In Building Science…See More
tedkidd replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??"Pat, I think you and I agree on a LOT of things.
One thing I don't want to see is more…"
tedkidd commented on Tom Delconte's blog post Robert Shiller Says Retrofits Are Never Worth It!"Bob B.
Buying a home is a good investment because it is forced savings more than a good…"
Joe Huang posted a discussionWhite Box Technologies launches Web-based weather data for building energy simulations
White Box Technologies is pleased to announce under agreement with ASHRAE the launch of WBT Weather…See More
Joseph Lamy commented on Jim Gunshinan's blog post The Universe Is Made of Stories"My life changed when I got 'ductalatored' - became familiar with proper sizing guides for…"
Judi Lyall joined allen p tanner's group
Energy Auditing Equipment for Sale, Trade or to Purchase
Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
© 2013 Created by Lawrence Berkeley National Laboratory.
