The context: I am from a northern climate municipal electric/natural gas utility. We provide rebates to customers for various energy efficiency projects, including adding insulation to existing…Continue
"The materials discussed on this blog post have been open cell.
To my knowledge, one customer in town did actually have a blown-out wall that occurred a few hours after installation (there are about 70-90 in my service territory…"
"Here is your fix.
Require infrared testing of each job wanting govt money as rebates.
What type of foam is this? All the foam pros in the Bay Area tell me they are scared to death of putting foam in walls as they want to avoid drywall…"
"My experience w/ injected foam is even if it is installed well and fills all cavities, it still has the problem of shrinkage. I went through a training a year ago at a foam mfg. I took a form with a plexiglass cover w/ me and had it injected. The…"
"Great pictures, thanks!
Exactly what I would expect to see from an expanding foam inside an invisible cavity. This, blown out walls, or both.
AirKrete or dense pack cellulose are the only cavity solutions I've…"
"Ed - I agree with you on the interpretations of the IR photos. Please see my post from 5/27, specifically the comment to David & Curtis re verification and IR interpretations.
As far as verification - shy of pulling down the…"
"Andrew - First, I noticed you provided none of the following:
1. Do the manufacturers provide installer training
2. Procedure/s for the "checks that have to be adhered to when pumping foam in place"
3. The pudding, i.e.,…"
"I agree with your third-party verifier comment. However - who is that? There is an IR shot included in a comment posted on 3/1 about foam - see above. I can think of a couple of different interpretations of the hot spots that show…"
"The sky does not fall because foam is used for insulation.
In the dynamic world foams hold their insulation value better than fibers. As humidity fluxuates so does the r-value of cellulose and fiberglass. ( I wonder if salesmen tell this story?)
"This whole discussion brings up an important tool that many of us in the utility incentive world are missing: third-party verification. So often due to lack of time or knowledge, we accept a manufacturers claims as fact and move on. And it is…"
The particular insulation I refer to in this discussion is a "dry urea-formaldehyde powder resin", which is a dry powder that is mixed on-site with water. So it's not exactly the same as the stuff from the 70's,…"
No, I do not agree. The applicator has complete controll over the manufacturing of the foam . If the mix is off, if the resin is old, If the ratios are off, the foam may appear good and ready for application. But is the…"
We agree with your last sentence in this post above and have been looking into this. A couple of months ago, our utility has banned this product from our list of products eligible for utility incentives.
Sorry for the delay.
A point of my own clarification: Neither I nor my co-workers were actually using IR as a real-time guide - a local contractor claimed to use IR in a real-time capacity during their installations, but…"
Welcome to Home Energy Pros! Feel free to join the conversation in the Forum and Groups. And share your energy efficiency photos, videos and upcoming events. If you're blogging about home performance, this is the place for you!
Since ancient times, wood burning has been used for heating in some capacity or other. Although, of late, wood stoves are thought of more as a decorative appliance than a heat source, in truth wood heat is still one of the most…