Chris Clay
  • Bellingham, WA
  • United States
Share on Facebook Share on Facebook Share
 

Chris Clay's Page

Latest Activity

Steve Waclo commented on Chris Clay's photo
Thumbnail

5 yr filter

"Accompanied by a horrifically leaky return system? I let our own High Efficiency filter (no longer used) stay in a bit too long and my furnace fan began to suck it into the ductwork."
Nov 20, 2016
Chris Klossner liked Chris Clay's photo
Oct 17, 2016
Chris Clay's photo was featured

5 yr filter

Non Homeowner friendly filter
Oct 3, 2016
Chris Clay posted photos
Sep 30, 2016
Chris Clay replied to Blake Shurtz's discussion Testing spillage on induced draft furnace?
"Monitor the pressure in the vent, if its positive in the vent for more than a minute it is most likely backdrafting. Use smoke at the hole you've drilled to take your CO measurement. When sharing a vent with a water heater check for spillage at…"
Sep 30, 2016
Chris Clay replied to Blake Shurtz's discussion Testing spillage in mechanical closet?
"You can stand outside and read pressures. Be sure to have extra hose as you need CAZ wrt outside pressure taken on the A channel, run a hose under the closet door (Input) and another hose to outside. Also you'll need vent wrt CAZ taken on the B…"
Sep 30, 2016
Chris Clay liked Blake Shurtz's discussion Testing spillage in mechanical closet?
Sep 30, 2016
Jan E. Graveamker left a comment for Chris Clay
"Have a great 2016 Chris Clay"
Jan 3, 2016
Chris Clay replied to Isaiah Borel's discussion Blown Cellulose VS Blown Fiberglass in the Attic
"The Cold Climate Housing Research Center in Fairbanks, AK has alot of information about this topic."
Oct 24, 2014
Tom White commented on Chris Clay's photo
Thumbnail

Knob and tube wiring

"Yikes!  Is the burnt fiber backing the result of ground fault to the duct through the old wiring insulation?"
Feb 24, 2014
Chris Clay's 2 photos were featured
Feb 24, 2014
Michael Dunseith commented on Chris Clay's photo
Thumbnail

Clearence issue

"Or spillage sensor ?"
Feb 13, 2014
Chris Clay posted photos
Jan 6, 2014
Chris Clay replied to Jack Baikoff's discussion Measuring fresh air intake ducted to a return and no way of measuring from outside.
"Use a duct blaster as apowered flow hood, look in duct blaster manual."
Jan 31, 2013
Diane Chojnowski left a comment for Chris Clay
"Hi Chris, Welcome to Home Energy Pros. Feel free to join the conversation in the Forum and Groups. And share your energy efficiency photos, videos and upcoming events. If you're blogging about home performance, this is the place for…"
Sep 15, 2012
Chris Clay is now a member of Home Energy Pros
Sep 11, 2012

Profile Information

Company
The Building Performance Center
Professional Certification
BPI Building Analyst, Enevelope, Professional
Professional Interests
Training Technicians
Ventilation
Dense Pack Insulation
Combustion Safety Testing
Multi-Family blower door testing
Website URL
http://www.buildingperformancecenter.org/

Chris Clay's Photos

Loading…
  • Add Photos
  • View All

Comment Wall (2 comments)

You need to be a member of Home Energy Pros to add comments!

Join Home Energy Pros

At 4:23pm on January 3, 2016, Jan E. Graveamker said…

Have a great 2016 Chris Clay

At 1:46pm on September 15, 2012, Diane Chojnowski said…

Hi Chris,

Welcome to Home Energy Pros. Feel free to join the conversation in the Forum and Groups. And share your energy efficiency photos, videos and upcoming events. If you're blogging about home performance, this is the place for you!

Don't forget to add your location on our Member Map.

Thanks!

Diane, HEP Moderator

 
 
 

Featured Forum Discussions

Too many BTU's. Too much horsepower?

Started by Steve in General Forum. Last reply by Walter Ahlgrim 22 hours ago. 3 Replies

Stack/wind pressure and flow networks.

Started by Daniel James Grundy in Training. Last reply by Daniel James Grundy yesterday. 5 Replies

BDT with vermiculite in hollow CMU walls?

Started by Brad Cook in General Forum. Last reply by John Nicholas yesterday. 2 Replies

Strange IR Image

Started by Larry Nissman in General Forum. Last reply by Brad Cook Mar 9. 7 Replies

Videos

  • Add Videos
  • View All

Latest Activity

Sarah OConnell posted a blog post

Crowdsourcing for Innovation

Share Your Ideas!Novel Building Envelope Design for Increased Thermal PerformanceIn 2014, more than…See More
11 hours ago
Colin de Paor is now a member of Home Energy Pros
13 hours ago
Walter Ahlgrim replied to Steve's discussion Too many BTU's. Too much horsepower?
"The 5 ton system you have is not 500 hp racecar engines they are 500 hp truck engines. The duct…"
22 hours ago
Daniel James Grundy replied to Daniel James Grundy's discussion Stack/wind pressure and flow networks.
"So I wanted to start with a basic who can help then go into more detail later. But yes find…"
yesterday
Daniel James Grundy replied to Daniel James Grundy's discussion Stack/wind pressure and flow networks.
"My tutor got back to me and while areas don't quite feel right a little to much assumptions…"
yesterday
Brennan Less replied to Daniel James Grundy's discussion Stack/wind pressure and flow networks.
"Daniel, I'm assuming you're trying to predict the airflows through the different openings…"
yesterday
Martin Newmark joined allen p tanner's group
Thumbnail

Energy Auditing Equipment for Sale, Trade or to Purchase

Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
yesterday
John Nicholas replied to Brad Cook's discussion BDT with vermiculite in hollow CMU walls?
"If the drywall is in good shape, you should have little worries about the 50pa depressurization…"
yesterday

Home Energy Pros

Welcome to Home Energy Pros – the unique digital community by and for those who work in the home energy performance arena.

Home Energy Pros was founded by the developers of Home Energy Saver Pro (supported by the U.S. Department of Energy) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network. Please honor our Guidelines

© 2017   Created by Lawrence Berkeley National Laboratory.   Powered by

Badges  |  Report an Issue  |  Terms of Service