Touch 'n Seal FireStop 814 Caulk

Touch ‘n Seal FireStop 814 is a UL classified, one part, elastomeric, intumescent firestop caulk that meets or exceeds the requirements of ASTM E-814 (UL 1479).

FireStop 814 bonds to almost any traditional building surface, including wood, concrete, gypsum board, fiberboard, and metal. When used in wood and concrete assemblies, FireStop 814 is an approved through-penetration sealant for use around HVAC ducting; metal and plastic pipes; electrical and communications wire or other cabling.

Comment

You need to be a member of Home Energy Pros to add comments!

Join Home Energy Pros

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Tom Conlon replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"Excellent snapshot, Griffin. You didn't happen to notice the fan manufacturer's name on…"
41 minutes ago
Brandon Walton replied to Brandon Walton's discussion 12 Things Every Home Performance Contractor Should Have on Their Work Truck
"Thanks Don! "
1 hour ago
Griffin Hagle replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"I was aware of but unfamiliar with them until moving to Southern California in 2012. After seeing…"
5 hours ago
tedkidd commented on Scott Mellberg's blog post Lessons from Energy Efficiency Advisors: Getting Homeowners Onboard with Home Performance
"David,  I don't think forcing people to do things works out well for anyone.  Any…"
6 hours ago
David Eakin commented on Scott Mellberg's blog post Lessons from Energy Efficiency Advisors: Getting Homeowners Onboard with Home Performance
""I believe it is our job to educate the consumer, understand the problems, help them…"
7 hours ago
Profile IconGary Fitzgerald, LOUIS ANDERSON and Jeremy Hargreaves joined Home Energy Pros
7 hours ago
eric anderson replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"In Connecticut’s climate, I am not in favor of them . Either they are the big old style that…"
8 hours ago
Don Fitchett replied to Brandon Walton's discussion 12 Things Every Home Performance Contractor Should Have on Their Work Truck
"Every little bit helps. :)"
8 hours ago
Tom White commented on Scott Mellberg's blog post Lessons from Energy Efficiency Advisors: Getting Homeowners Onboard with Home Performance
"Ted, I understand and share your concern about the lack of guidance on the part of the "Home…"
8 hours ago
Mike Kandel added a discussion to the group Building Performance Institute (BPI)
10 hours ago
Mike Kandel posted a discussion
10 hours ago
tedkidd commented on Scott Mellberg's blog post Lessons from Energy Efficiency Advisors: Getting Homeowners Onboard with Home Performance
"David,  Please think some of these things through.  If programs suck so much, how can…"
10 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service