R-6 Spider living in an attic

While performing an energy evaluation in my mixed humid climate zone, I found this scary alien living in an attic! This thing is a danger to energy efficiency and will definitely inject a poisonous bite into your utility bills when the daytime temperatures in its nest reach 130 degrees!

Views: 505

Comment

You need to be a member of Home Energy Pros to add comments!

Join Home Energy Pros

Comment by Michael Dunseith on March 16, 2013 at 9:59am

It really doesn't look that bad considering whats out there. But looks can be deceiving! You could box them out with foam board and bring it inside instead of the whole attic.

Comment by Alex Walter on June 20, 2011 at 9:25am

Attic is the number one location on my list of 21 "No-No Locations for Mechanical Equipment".

http://dl.dropbox.com/u/458200/When%20Buying%20%26%20No-No%20Loc%20...

The only acceptable fix for these situations is to either (1) remove the all the mechanical equipment and ductwork from outside the conditioned space or (2) convert the attic into conditioned space by properly insulating its exterior so as to have it included inside the envelope.

 

Alex Walter - in mile high Denver, Colorado USA

Comment by Matthew Lang on April 11, 2011 at 8:00am
What did you recommend that they do?

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Jerry Lawrence posted events
21 hours ago
Morgan M Audetat replied to Bryan Pringle's discussion Dense packed cellulose in basement?
"Right you are. You have to ask: what will the cellulose contribute.  Here in Minneapolis we…"
22 hours ago
Morgan M Audetat replied to Tony Hicks's discussion Slab-on-grade Insulation
"All slabs float. We have been installing radiant floors on various slab constructions since the…"
23 hours ago
Tony Hicks replied to Tony Hicks's discussion Slab-on-grade Insulation
"2" XPS foam. I'd love an R-20. Having foam thick enough to get an R-20 would be…"
23 hours ago
Morgan M Audetat replied to Larry Schaffert's discussion How to correctly insulate exterior wall in a 1900 house?
"Sorry, I did missed the "siding nailed directly to the framing", my grandfather would…"
yesterday
Morgan M Audetat replied to Larry Schaffert's discussion How to correctly insulate exterior wall in a 1900 house?
"My own farm house is sided with 1/2" t&g pine boards and vinyl. We foamed then from the…"
yesterday
Tony Hicks replied to Tony Hicks's discussion Slab-on-grade Insulation
"Great thought! I think that would work. I'll have to put the cost together and see where I…"
yesterday
Danny Gough replied to Tony Hicks's discussion Slab-on-grade Insulation
"This is a tough detail because the foam on the edge of a slab doesn't provide sufficient…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service