Defective Solar Cell - Image Courtesy of Fluke Corp 2010

Defective Solar Cell - Image Courtesy of Fluke Corp 2010

Here is a infrared image, with Fluke IR-Fusion™ technology "blending" taken by a colleague of my in Spain...Roberto Poyato. If you adjust the level and span properly, and make sure that you are not getting thermal reflections off of the surfaces, you can often determine defective or under-performing PV cells within a panel. The one in the center of this image stuck out like a sore thumb in infrared! It was verified from the back side of the panel as well.

Comment

You need to be a member of Home Energy Pros to add comments!

Join Home Energy Pros

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Hal Skinner replied to Hal Skinner's discussion An example of what an RCC can do with no R- insulation in the walls.
"Mornin Brett. 90 to 85, yes a slight variance there.  Same ASTM test, different scientists,…"
20 hours ago
Bret Curry replied to Hal Skinner's discussion An example of what an RCC can do with no R- insulation in the walls.
"Great information Hal. It appears the thermal emissivity in your test was .85 rather than .90. Are…"
21 hours ago
Juan Roca commented on Dale Stephens's blog post LED Lighting - Garage Door opener interference
"Hi,There is a real problem with remote controls and LED lights. However, there is a solution in the…"
yesterday
Profile IconJuan Roca and Elizabeth Coe joined Home Energy Pros
yesterday
Casey Gesell posted videos
yesterday
Gerald Shechter posted videos
yesterday
Hal Skinner replied to Hal Skinner's discussion An example of what an RCC can do with no R- insulation in the walls.
"Bret,  here are the 2 reports I referred…"
yesterday
Craig Foley shared George Kopf's discussion on Twitter
yesterday

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service