FLIR E50BX Infrared Camera Thermal Imager

FLIR E50BX
Focal Plane Array detector with 240 x 180 pixels infrared resolution (43,200 pixels)
Temperature range: -4°F to 248°F (-20°C to 120°C) with ±2% or 2°C accuracy
0.045°C @ 30°C Thermal Sensitivity (N.E.T.D)
Manual focus, 4x continuous zoom
Built-in laser pointer, 3.5" Touch-Screen LCD display
Built-in 3.1 Megapixel visible light digital camera with bright LED lamp for poorly lit environments
Functions include Scalable Picture-In-Picture, Thermal Fusion, Insulation & Humidity Alarm, Voice/Text Annotation, Laser Pointer Marker
Measurement modes: up to 3 movable Spots, Area (Min/Max/Average), Auto Hot/Cold spot marker, Isotherm (Above/Below), Delta T
METERLiNK™ Bluetooth® Wireless communication
Wi-Fi Connectivity allows to send images and data to mobile devices
Thumbnail Image Gallery function allows quick search of stored images
Memory card slot for image storage (more than 1,000 Radiometric JPEG images)
Complete with Memory card, Li-Ion rechargeable battery, power supply, USB cable, hand strap, lens cap and hard carrying case
Includes FLIR Tools software for analysis of radiometric images

http://www.aikencolon.com/flir-e50bx-ir-infrared-camera-thermal-imager

http://www.netzerotools.com/flir-e50bx-ir-infrared-camera-thermal-imager

Views: 10

Comment

You need to be a member of Home Energy Pros to add comments!

Join Home Energy Pros

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
5 hours ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
6 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
8 hours ago
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
9 hours ago
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
10 hours ago
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
11 hours ago
Lars olsen posted a blog post
19 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"The heat exchanger gets burnt out, if presser is to high or if mix is to rich, then I see holes in…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service