Defective Solar Cell - Image Courtesy of Fluke Corp 2010

Defective Solar Cell - Image Courtesy of Fluke Corp 2010

Here is a infrared image, with Fluke IR-Fusion™ technology "blending" taken by a colleague of my in Spain...Roberto Poyato. If you adjust the level and span properly, and make sure that you are not getting thermal reflections off of the surfaces, you can often determine defective or under-performing PV cells within a panel. The one in the center of this image stuck out like a sore thumb in infrared! It was verified from the back side of the panel as well.

Comment

You need to be a member of Home Energy Pros to add comments!

Join Home Energy Pros

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Profile IconEthan Bukowiec and Andy Li joined Home Energy Pros
4 hours ago
Bob Blanchette replied to w d's discussion Managing Solar Energy
"Look into passive solar heating. The south windows have enough overhang that the windows are shaded…"
17 hours ago
Steve Waclo commented on Kaplan Clean Tech's blog post The Difference Between Home Inspection and Energy Auditing [Infographic]
"Excellent graphic summary but I don't agree Home Inspectors also check energy use. I believe…"
yesterday
Steve Waclo replied to Linda Wigington's discussion Low-cost electricity monitoring: Accuracy & Applications in the group 1000 Home Challenge
""The problem with plug in energy testers is they miss most of a typical homes energy use. 240v…"
yesterday
w d posted a discussion

Managing Solar Energy

What's the state of the art on managing solar energy (esp. at the home)?There's surely no…See More
yesterday
Bud Poll posted a discussion

Inconsistant Local Authotity

It becomes frustrating to give people modern advice and then have to backtrack and tell them to do…See More
yesterday
Morgan Hunter replied to Isaiah Borel's discussion Blown Cellulose VS Blown Fiberglass in the Attic
"Up here In Canada Fibreglass wins hands down for heat loss! Check back 5, 10 & 20 years later…"
yesterday
Bob Blanchette replied to Linda Wigington's discussion Low-cost electricity monitoring: Accuracy & Applications in the group 1000 Home Challenge
"The problem with plug in energy testers is they miss most of a typical homes energy use. 240v…"
Saturday

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service