Elfi Wall System

R40 walls and R60 roofs

  • photo
  • photo
  • photo
  • photo
  • photo
  • photo

Comment

You need to be a member of Home Energy Pros to add comments!

Join Home Energy Pros

Comment by Ron Friedman on May 18, 2012 at 6:16am

Elfi also has a system for retrofitting residential buildings. It does require the removal of either the exterior or interior wall coverings. The result is R40 walls. Same can be done for the roof but you will get a higher R value.

Comment by Ron Friedman on May 17, 2012 at 7:17am

The Elfi Wall System allows you to build or retrofit existing structures to R40 walls and R60 roofs. Our shells go up in 1/3 the time of traditional construction. Load bearing walls to 9 stories. Any architectural element can be accomodated. We manufacture in Chicago however we are looking to license others in our technology, design your factory and train your staff.

Our retrofit system can go on the inside or outside of your existing structure.

Design any Elfi system with solar pv, solar thermal, energy storage and net zero energy needs are within reach.

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Bryan Pringle replied to Bryan Pringle's discussion Dense packed cellulose in basement?
"I am getting a lot of "bad idea" push back on this.  I fully understand that…"
11 hours ago
Greg Mitchell commented on Larry Ralph Jr's blog post Top 7 Worst Crawl Space Repairs
"Spray Foam should be used in crawlspaces.   To learn about closed cell foam in crawlspaces…"
11 hours ago
Jerry Lawrence posted events
yesterday
Morgan M Audetat replied to Bryan Pringle's discussion Dense packed cellulose in basement?
"Right you are. You have to ask: what will the cellulose contribute.  Here in Minneapolis we…"
yesterday
Morgan M Audetat replied to Tony Hicks's discussion Slab-on-grade Insulation
"All slabs float. We have been installing radiant floors on various slab constructions since the…"
yesterday
Tony Hicks replied to Tony Hicks's discussion Slab-on-grade Insulation
"2" XPS foam. I'd love an R-20. Having foam thick enough to get an R-20 would be…"
yesterday
Morgan M Audetat replied to Larry Schaffert's discussion How to correctly insulate exterior wall in a 1900 house?
"Sorry, I did missed the "siding nailed directly to the framing", my grandfather would…"
yesterday
Morgan M Audetat replied to Larry Schaffert's discussion How to correctly insulate exterior wall in a 1900 house?
"My own farm house is sided with 1/2" t&g pine boards and vinyl. We foamed then from the…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service