CO

Views: 80

Comment

You need to be a member of Home Energy Pros to add comments!

Join Home Energy Pros

Comment by Gary Baggett on February 7, 2011 at 6:05pm
Jack, I added some pics for you
Comment by Gary Baggett on February 7, 2011 at 5:53pm
lol...I didn't want to say that...I actually have a better picture of this somewhere. I should post a few on my "page"
Comment by Jack Baikoff on February 7, 2011 at 5:50pm
Yeah, thanks, sorry I did not notice it had an ambient CO display.
Comment by Gary Baggett on February 7, 2011 at 4:30pm
no, that was the co in the flu gases...which 400 constitutes an "emergency"
Comment by Jack Baikoff on February 7, 2011 at 4:25pm
OMG! What was the ambient CO reading?
Comment by Gary Baggett on February 7, 2011 at 12:44pm
Hey...I know where that picture came from...
Comment by Michael Dunseith on December 27, 2010 at 2:56pm
A friend of mind shared this with me the other day. I don't recommend keeping your very expense testing equipment in the flue any longer then need be.   Once you determined that the CO is excessive, does it really matter if its 500 ppm or more?  Note the efficiency!

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Mariusz Chorazy posted a blog post

Here are a few tips to keep your air conditioning bill low

TAKE GOOD CARE OF YOUR AIR CONDITIONER – Like any major appliance, your AC requires regular…See More
7 hours ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Morgan, I got this below from the Knight installation manual. I note a few things, -These…"
10 hours ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
yesterday
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
yesterday
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
yesterday
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
yesterday
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
yesterday
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service