CO

Views: 79

Comment

You need to be a member of Home Energy Pros to add comments!

Join Home Energy Pros

Comment by Gary Baggett on February 7, 2011 at 6:05pm
Jack, I added some pics for you
Comment by Gary Baggett on February 7, 2011 at 5:53pm
lol...I didn't want to say that...I actually have a better picture of this somewhere. I should post a few on my "page"
Comment by Jack Baikoff on February 7, 2011 at 5:50pm
Yeah, thanks, sorry I did not notice it had an ambient CO display.
Comment by Gary Baggett on February 7, 2011 at 4:30pm
no, that was the co in the flu gases...which 400 constitutes an "emergency"
Comment by Jack Baikoff on February 7, 2011 at 4:25pm
OMG! What was the ambient CO reading?
Comment by Gary Baggett on February 7, 2011 at 12:44pm
Hey...I know where that picture came from...
Comment by Michael Dunseith on December 27, 2010 at 2:56pm
A friend of mind shared this with me the other day. I don't recommend keeping your very expense testing equipment in the flue any longer then need be.   Once you determined that the CO is excessive, does it really matter if its 500 ppm or more?  Note the efficiency!

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Bryan Pringle replied to Bryan Pringle's discussion Dense packed cellulose in basement?
"I am getting a lot of "bad idea" push back on this.  I fully understand that…"
11 hours ago
Greg Mitchell commented on Larry Ralph Jr's blog post Top 7 Worst Crawl Space Repairs
"Spray Foam should be used in crawlspaces.   To learn about closed cell foam in crawlspaces…"
11 hours ago
Jerry Lawrence posted events
yesterday
Morgan M Audetat replied to Bryan Pringle's discussion Dense packed cellulose in basement?
"Right you are. You have to ask: what will the cellulose contribute.  Here in Minneapolis we…"
yesterday
Morgan M Audetat replied to Tony Hicks's discussion Slab-on-grade Insulation
"All slabs float. We have been installing radiant floors on various slab constructions since the…"
yesterday
Tony Hicks replied to Tony Hicks's discussion Slab-on-grade Insulation
"2" XPS foam. I'd love an R-20. Having foam thick enough to get an R-20 would be…"
yesterday
Morgan M Audetat replied to Larry Schaffert's discussion How to correctly insulate exterior wall in a 1900 house?
"Sorry, I did missed the "siding nailed directly to the framing", my grandfather would…"
yesterday
Morgan M Audetat replied to Larry Schaffert's discussion How to correctly insulate exterior wall in a 1900 house?
"My own farm house is sided with 1/2" t&g pine boards and vinyl. We foamed then from the…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service