Mobile Home Ceiling

No sure if this meets code...hmmm?

Views: 52

Comment

You need to be a member of Home Energy Pros to add comments!

Join Home Energy Pros

Comment by Mark Richardson on November 8, 2010 at 1:11pm
Uh huh! It's almost a FULL inch!
Comment by James Sayers on November 8, 2010 at 12:27pm
Yikes - this is ceiling insulation??
Comment by Evan Mills on November 7, 2010 at 2:04am
Yeah; best if they can be in-line (quicker for folks to see). I experimented on one of yours. Used the little picture icon in the toolbar (just to the right of the bullet-list tool), and uploaded your .jpgs. They ended up in-line. If trouble, let me or diane know
Comment by Mark Richardson on November 6, 2010 at 2:49pm
Ok, Evan.
I posted it, but I'm not sure if I did it right?
Comment by Evan Mills on November 5, 2010 at 3:20am
This is perfect for the Hall of Shame.

http://homeenergypros.lbl.gov/group/hallofshame

Wanna post it there?

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
6 hours ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
6 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
8 hours ago
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
9 hours ago
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
10 hours ago
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
11 hours ago
Lars olsen posted a blog post
19 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"The heat exchanger gets burnt out, if presser is to high or if mix is to rich, then I see holes in…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service