Can anyone tell me how Wrtightsoft treat a a insulated roof deck compared to a insulated flat attic.

Views: 605

Replies to This Discussion

The best way to determine what RSU does with scenarios like this is to do it both ways, then compare the reports to each other. The "component constructions" report (found in the Load section) will show you the gains losses attributed to each portion of your building. You could compare the two to each other here.

The general difference is that different roof types in RSU reference different construction assemblies in ACCA's Manual-J 8th Edition book. These "types" often have different U-values and assumed temperature differences, which means that they have varying HTM's (Heat Transfer Multipliers). For instance, a sloped ceiling with R38 cavity insulation is referencing group 18A, while a flat ceiling under vented attic references group 16B.

You'll also notice that anytime you're specifying a sloped roof surface using the room properties tab, Wrightsoft is making assumptions about the square footage of these surfaces. When you define a ceiling via the "room properties," flat ceilings use the rooms footprint as the sqft, while sloped ceilings assume a "typical" slope (somewhere around a 6/12, I believe). If your roof is steeper than 6/12, you should use the "ceiling tool" to draw a separate ceiling object on top of your room/building. This will allow you actually define the pitch of the roof, thus being more accurate.

Hope that helps!

Here's a recent post on how Manual-J can lead you to undersized ductwork, if you're not careful. I'd love to know what you think about it. Please comment!

Thanks for the information, I'll start running a few models and see what happens.

In addition to Isaac's response below, if you're insulating the roof deck and encapsulating the attic, be sure to model the ductwork as being within building envelope. This will reduce energy losses through the ducts. 

RSS

Discussion Forum

Can you trust your Load Calc Software?

Started by Christopher Morin. Last reply by Eric Kjelshus Feb 18, 2014. 1 Reply

Attic insulation vs. Insulated roof deck

Started by Robert DV. Last reply by Robert DV Jul 6, 2012. 3 Replies

Support licensing in 2011

Started by Robert Zockoff. Last reply by Robert Zockoff Jun 20, 2011. 2 Replies

Latest Activity

Home Energy Magazine posted a video

Marc Rosenbaum, Principal, Energysmiths, compulsive measurer

Home Energy Magazine's series "Legends of Home Performance". "Making a great building involves so many aspects of human experience...it's really about how th...
6 hours ago
Home Energy Magazine posted a blog post
6 hours ago
Profile IconSteve Baker, Valerie Beichner, Dave Jones and 1 more joined Home Energy Pros
10 hours ago
Home Energy Magazine's video was featured

Testing HVAC Grilles with a Blower Door

Watch home performance testing guru Corbett Lunsford test the pressure, airflow, and velocity performance of some beautiful custom carved wooden return grill...
11 hours ago

Photos

Loading…
  • Add Photos
  • View All

© 2017   Created by Lawrence Berkeley National Laboratory.   Powered by

Badges  |  Report an Issue  |  Terms of Service