If you want to learn more about using infrared thermography for home inspections, tune into the upcoming webinar that I’ll be presenting for the Wisconsin Energy Center TOMORROW, Tuesday, November 9th from 1:00-2:30 (Central). See http://www.ecw.org/ir for details. I’ve packed a lot into this webinar and it is strictly non-commercial.

Please note that a Fluke TiR1 imaging system (a great unit to use for building inspections!) will be given away by the webinar sponsor, Fluke, to a very lucky participant! You can also have as many people as you want listening in for one registration fee so plan to have the whole crew on hand if you can.

I hope you can join me!

John Snell
The Snell Group
800-636-9820

Views: 58

Attachments:

Replies to This Discussion

The webinar went very well last week with over 450 people from 30+ states, 4 Canadian provinces and several other countries viewing it! It is now available on-demand ($89) if you missed out! Simply go to http://www.ecw.org/ir and click on REGISTER.

The feedback I got from viewers at all levels of experience was positive, from "Gee I never new that!" to "A good, solid review after several years in the field." Enjoy taking what you learn into you work—there is no better investment for building professionals than an infrared imaging system used well every single day!

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
2 hours ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
2 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
5 hours ago
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
6 hours ago
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
7 hours ago
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
8 hours ago
Lars olsen posted a blog post
15 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"The heat exchanger gets burnt out, if presser is to high or if mix is to rich, then I see holes in…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service