HOMES Act introduced with Bi-Partisan Sponsorship
We don't see a lot of bi-partisan bills in Congress these days. Here's one focusing on home…See More
Blow machines
Does anyone have any input on what would be the best weatherization blow machine out there? I would like to have a machine that is primarily used for Retro fit walls and attic, but can also blow fiberglass. I have had PTO diven machines, independant motor machines, but never an electric. I would be interested in hearing feedback.
Views: 106
Replies to This Discussion
-
Permalink Reply by Matthew Redmond on -
I primarily use the Krendl machines. The Krendl 500 works well for both dense pack and open blow. It also handles cellulose and fiberglass. I like the dual blower and the machine is fairly light so two man can move it. For larger high volume jobs you may want to spec out a Krendl 2000 or one of their larger machines. Go to J&R products (www.jrproductsinc.com) or www. krendlmachine.com for the specs.
-
-
Permalink Reply by Robert D York Jr on -
Accu 1 makes pretty good machines, 9300 and 9400 can blow cell or fiberglass. Biggest problem that I've had with them is getting voltage drop through cords. Eliminated it by setting up a breaker box inside the truck and running a 10 guage cord to the home with adapters for dryer plug or to the panel.
-
Home Energy Pros
Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
Latest Activity
David Eggleton replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??"That varies, as policies are different from state to state."
Orvil D Boyer replied to David Starrett's discussion I am looking for a good IR camera in the group Energy Auditing Equipment for Sale, Trade or to Purchase"I have a Fluke TIR 32. Used aproximately 10 times 1.5 yrs old. This is the first…"
Orvil D Boyer joined allen p tanner's group
Energy Auditing Equipment for Sale, Trade or to Purchase
Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
George Kopf posted a discussionMisting Aeroseal in Pressurized Home = Amazing Air Sealing Innovation
As a training program manager for a non-profit, I am often too busy managing my program to catch…See More
Dennis Heidner replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??"Ben, the German highway system concept actually started BEFORE Nazi Germany during the…"
Stan Kuhn replied to Patrick Michaelyan's discussion Hot Upper Stories"You note overheating on the south side (naturally.) Assuming the typical roof overhang of…"
Patrick Michaelyan replied to Patrick Michaelyan's discussion Hot Upper Stories"Thanks a lot Ed. And thanks to all who have added their two cents.
I think I know where to take…"
Ed Minch replied to Patrick Michaelyan's discussion Hot Upper Stories"We have successfully treated this same problem in perhaps 1000 of this same house in the…"
Craig Savage commented on Craig Savage's video
What is a Heat Pump Water Heater
"Hello Tom
We are working with A.O. Smith, GE and Stiebel Eltron on a Building America task to…"
Tom Delconte commented on Craig Savage's videoWhat is a Heat Pump Water Heater
"Craig: I was serious, since my propane price jumped from .98 to 1.85! according to everyone the GE…"
Ben Jacobs replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??"I think that government support for good ideas results in major benefits over the long haul.
Please…"
© 2013 Created by Lawrence Berkeley National Laboratory.
