Does anyone have any input on what would be the best weatherization blow machine out there? I would like to have a machine that is primarily used for Retro fit walls and attic, but can also blow fiberglass. I have had PTO diven machines, independant motor machines, but never an electric. I would be interested in hearing feedback.

Views: 393

Replies to This Discussion

I primarily use the Krendl machines. The Krendl 500 works well for both dense pack and open blow. It also handles cellulose and fiberglass. I like the dual blower and the machine is fairly light so two man can move it. For larger high volume jobs you may want to spec out a Krendl 2000 or one of their larger machines. Go to J&R products (www.jrproductsinc.com) or www. krendlmachine.com for the specs.

Accu 1 makes pretty good machines, 9300 and 9400 can blow cell or fiberglass. Biggest problem that I've had with them is getting voltage drop through cords. Eliminated it by setting up a breaker box inside the truck and running a 10 guage cord to the home with adapters for dryer plug or to the panel.

RSS

Discussion Forum

The Truth About Windows?

Started by Joel Greenberg. Last reply by Carl Johnson Aug 30, 2016. 20 Replies

BPI Training

Started by Andrew Vidal. Last reply by Ed Minch Jul 6, 2013. 3 Replies

WAP In DC

Started by Bret Monroe. Last reply by Pat Dundon Jul 5, 2013. 3 Replies

Blow machines

Started by Jeff Stuart. Last reply by Robert D York Jr Feb 24, 2013. 2 Replies

Videos

  • Add Videos
  • View All

Latest Activity

Walter Ahlgrim replied to Steve's discussion Too many BTU's. Too much horsepower?
"The 5 ton system you have is not 500 hp racecar engines they are 500 hp truck engines. The duct…"
5 hours ago
Daniel James Grundy replied to Daniel James Grundy's discussion Stack/wind pressure and flow networks.
"So I wanted to start with a basic who can help then go into more detail later. But yes find…"
9 hours ago
Daniel James Grundy replied to Daniel James Grundy's discussion Stack/wind pressure and flow networks.
"My tutor got back to me and while areas don't quite feel right a little to much assumptions…"
9 hours ago
Brennan Less replied to Daniel James Grundy's discussion Stack/wind pressure and flow networks.
"Daniel, I'm assuming you're trying to predict the airflows through the different openings…"
11 hours ago
Martin Newmark joined allen p tanner's group
Thumbnail

Energy Auditing Equipment for Sale, Trade or to Purchase

Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
13 hours ago
John Nicholas replied to Brad Cook's discussion BDT with vermiculite in hollow CMU walls?
"If the drywall is in good shape, you should have little worries about the 50pa depressurization…"
15 hours ago
tedkidd replied to Steve's discussion Too many BTU's. Too much horsepower?
"Does the house ever feel clammy? Do you have to keep the thermostat below 74 to be comfortable? Is…"
18 hours ago
Danielle Sass Byrnett liked Diane Chojnowski's blog post Don MacOdrum receives BPI's 2017 Tony Woods Award!
18 hours ago

Home Energy Pros

Welcome to Home Energy Pros – the unique digital community by and for those who work in the home energy performance arena.

Home Energy Pros was founded by the developers of Home Energy Saver Pro (supported by the U.S. Department of Energy) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network. Please honor our Guidelines

© 2017   Created by Lawrence Berkeley National Laboratory.   Powered by

Badges  |  Report an Issue  |  Terms of Service