With the latest On Bill financing, we are require to use actual fuel usage in TREAT. I tried a couple of times to use actual usage or tried to "True Up " the file with no luck. I'm not really sure if these are the same thing.
Anyone out there willing to teach us how to go about truing up a TPG or entering actual fuel usage?
Thanks
Tags:
Permalink Reply by Amber Harris on February 13, 2012 at 8:38am HI Paul,
Here is a link to an online video that is an introduction to using TREAT software. There is a section that discusses adding a meter.
http://help.psdconsulting.com/index.php?_m=knowledgebase&_a=vie...
Amber Harris
Customer Support
Performance Systems Development
Permalink Reply by Paul Lasicki on February 14, 2012 at 3:36am Hi Amber,
Thanks for replying to my question,but the link to the video showed an error message.
Permalink Reply by Amber Harris on February 14, 2012 at 6:18am Here is a more general link to our TREAT support area.
http://www.psdconsulting.com/software/treat/support
From there click on TREAT training videos. This should work if you have TREAT installed on the computer from which you are searching.
Permalink Reply by Paul Lasicki on February 16, 2012 at 3:11am Thanks, find it. I haven't the time yet, but I'll be checking it out in a day or two, and I let you know if I have any further questions.
Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
David Eakin commented on Elisa Wood's blog post Momentum builds for energy efficiency...but is the wolf at the door?
Egr renovation posted a status
Egr renovation posted a status
Meagan Foster posted events
Meagan Foster updated an event
Meagan Foster updated an event
Meagan Foster updated an event
Meagan Foster updated an event© 2013 Created by Lawrence Berkeley National Laboratory.