Treat descriptions
Hi,
Is it possible to add preferences in the drop down menus for surface descriptions. Example, when I go to a 2x8 framing there is nothing listed for the drop down item" fiberglass, blown fiberglass". Can I fill in a figure for this?
Thanks
Views: 44
Replies to This Discussion
-
Permalink Reply by Amber Harris on -
Hello Paul,
It is not possible for users to add custom surfaces to TREAT at this time. If there are surfaces that you would like to see added as they are common construction types please submit them to us through the TREAT support website and they will be considered for inclusion in the next release of TREAT.Thank you!
Amber Harris
Performance Systems Development
customer support
-
Home Energy Pros
Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
Latest Activity
Edward Foskey just added their location.
Bud Poll replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans"This is a topic I have discussed many times, but unfortunately cost is all too often the deciding…"
Sean Lintow Sr replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans"If you can't talk them into replacing with IC rated...
Look into Tenmat - those are designed…"
Bachi Brunato posted a discussionBoxing and Insulating Around Non-ICAT Cans
I have a client with 16) 4" halogen recessed light fixtures in the attic.I'd like to cover the cans…See More
Dennis Heidner replied to Patrick Michaelyan's discussion Hot Upper Stories"Could you have them make a simple two line graph of the outside temperature, noting sun/clouds,…"
Bob Blanchette replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??"You make some valid points, especially with the base rate charges. Increasing the base rate instead…"
Bob Blanchette replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??"Amen, make energy show it's true cost instead of subsidizing it.
We have some of the lowest…"
Dennis Heidner replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??"The press report really doesn't give enough information to clearly answer why they are…"
Edward Foskey commented on Edward Foskey's blog post Preparing to Update the Heat Pump"Gustavo,
Thanks for the input. I agree with you in that I will be waiting till my system's…"
Gustavo Melo commented on Edward Foskey's blog post Preparing to Update the Heat Pump"Any system that is out of warranty is really a coin toss as to whether it is financially better to…"
Dennis Heidner replied to J.C. Martel's discussion Disasters & sustainable energy"Such as Greensburg…"
© 2013 Created by Lawrence Berkeley National Laboratory.
