A client has an old gas fired boiler with a gas fired storage tank DHW. I'm looking to replace both units with a high efficiency gas fired boiler 2 pipe direct vent seal combustion unit with indirect water heater. 

How do I enter this in improvements?

Thanks

Paul

Views: 179

Replies to This Discussion

HI Paul,

we offer in depth training around the TREAT software and if you wish, I can put you in touch with one of our trainers if you want to "friend" me and pass along your contact information. Another option is filling out out online request form and someone will reach out to you directly.  

http://www.psdconsulting.com/contact

Amber Harris

Performance Systems Development

customer support

Hi Amber,

Is it possible to just get an answer to my question rather then going through a training session.I just find going through the website a hassle. This is the reason why I started this group here.

Thank you

Hi Paul,

It turns out this isn't a simple question but it depends on the specifics of your modeling situation.

Our engineering staff offers modeling support on an hourly basis and we have a number of online and in person training sessions available. Let me know if I can put you in touch with our training coordinator.

Hi Amber,

If you can put me touch with someone that will just answer specific questions on occasion, that would be great.

Thanks

Paul

send m me an e-mail tolowski@earthlink.net randy you are correct you can get answers here

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Evan Mills replied to Sandra K. Adomatis, SRA's discussion Green Mortgage Appraisal Roundtable
"Would love see your slides, but the AI site requires login.  Can you post them here or email…"
2 hours ago
Colin Genge posted a blog post

What needs to be done to get builders to follow Code for duct and envelope leakage?

“Have you been ripped off for $100,000 by your builder?  Let us help you get what you paid for! …See More
8 hours ago
Green Training USA posted an event
Thumbnail

Proctor’s Without Borders at Online

July 29, 2015 to August 7, 2015
Complete your training at your own pace and take exams when you want and where you want. No…See More
17 hours ago
Gar Swaffar commented on Gar Swaffar's blog post Cost of using a BPI QCI?
"Ip.s., I would presume there will be a difference between the Left Coast and nearly everywhere else."
yesterday
Gar Swaffar posted a blog post

Cost of using a BPI QCI?

I'd like to find out if there is a consensus on a rule of thumb cost of a QCI onsite for…See More
yesterday
Gar Swaffar is now a member of Home Energy Pros
yesterday
Colin Genge posted an event

Infiltration and Duct Leakage with BPI at Online

July 30, 2015 from 1pm to 2pm
Blower door and duct test requirementsCalculating resultsCertification optionsTest preparation and…See More
yesterday
Stacy Hunt posted an event

Volunteers needed for the upcoming U.S. Department of Energy Solar Decathlon in Irvine, CA at Orange County Great Park

October 8, 2015 at 11am to October 18, 2015 at 7pm
Volunteer for the upcoming U.S. Department of Energy Solar Decathlon 2015, taking place Oct. 8-18…See More
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service