A client has an old gas fired boiler with a gas fired storage tank DHW. I'm looking to replace both units with a high efficiency gas fired boiler 2 pipe direct vent seal combustion unit with indirect water heater. 

How do I enter this in improvements?

Thanks

Paul

Views: 179

Replies to This Discussion

HI Paul,

we offer in depth training around the TREAT software and if you wish, I can put you in touch with one of our trainers if you want to "friend" me and pass along your contact information. Another option is filling out out online request form and someone will reach out to you directly.  

http://www.psdconsulting.com/contact

Amber Harris

Performance Systems Development

customer support

Hi Amber,

Is it possible to just get an answer to my question rather then going through a training session.I just find going through the website a hassle. This is the reason why I started this group here.

Thank you

Hi Paul,

It turns out this isn't a simple question but it depends on the specifics of your modeling situation.

Our engineering staff offers modeling support on an hourly basis and we have a number of online and in person training sessions available. Let me know if I can put you in touch with our training coordinator.

Hi Amber,

If you can put me touch with someone that will just answer specific questions on occasion, that would be great.

Thanks

Paul

send m me an e-mail tolowski@earthlink.net randy you are correct you can get answers here

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Steven Lewis replied to William Fisher's discussion Can tankless water heaters provide hot water even when the groundwater is fairly cold?
"Look at reducing the ambient humidity in the home.  The dew point is the key to the…"
yesterday
Olivia Taylor posted blog posts
yesterday
norman farwell replied to Bryan Pringle's discussion Dense packed cellulose in basement?
"Ha, we're on the same wavelength.  That's the big question--I'm still thinking…"
Thursday
Bryan Pringle replied to Bryan Pringle's discussion Dense packed cellulose in basement?
"Thanks Norm, we'll have a couple of case studies when all is said and done. Just curious, do…"
Thursday
norman farwell replied to Bryan Pringle's discussion Dense packed cellulose in basement?
"Bryan,  I am trying the same thing for most of the same reasons and also against advice to the…"
Thursday
Morgan M Audetat commented on Sean McLoughlin's blog post Programming in-floor electric radiant heat, is it worth it?
"You would need a large bathroom to see the difference. We install them both ways depending on the…"
Thursday
Dennis Heidner commented on Sean McLoughlin's blog post Programming in-floor electric radiant heat, is it worth it?
"The key is that this is the bathroom.  Occupancy is not constant.  It is more likely used…"
Thursday
Charles Cormany commented on Sean McLoughlin's blog post Programming in-floor electric radiant heat, is it worth it?
"I have seen resistance floor heaters add nearly $100 per month to an electric bill. Since most…"
Thursday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service