Permalink Reply by Amber Harris on February 13, 2012 at 8:41am HI Paul,
In both fields the capacity should be entered in as btu/hr and the full capacity of the system can be entered in for the heating screen and the hot water screen.
In addition, here is a link to the TREAT helpdesk that offers additional resources to commonly asked questions.
http://help.psdconsulting.com/index.php?_m=knowledgebase&_a=view
Amber Harris
Customer Support
Performance Systems Development
Permalink Reply by Paul Lasicki on February 14, 2012 at 3:33am Great, thanks Amber
Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
Bryce Cramer joined Leslie McDowell, BPI's group
Bryce Cramer replied to Mike Kandel's discussion June's Stump the Chump: What's Wrong with this Picture? in the group Building Performance Institute (BPI)
James Hatheway added a discussion to the group Job Board
Emilian Karchev joined Michael Stuart's group
Emilian Karchev replied to Tim Marlett's discussion Removal of bad smells from mold contaminated attic
Jack Sadyak commented on Jack Sadyak's blog post Why Getting a Quantum Heat Pump is a Better Choice?
Dennis Heidner commented on Macie Melendez's blog post Passive Proponent—Q&A with Brandon Weiss
John Wes joined James Sayers's group
John Wes joined Tom White's group© 2013 Created by Lawrence Berkeley National Laboratory.